Recent content by Drag Racer

Thanks, I have a motor on the way. Mine is (obviously) keyed, and my new motor is keyed.

Thanks Broh, luckily there isn't too much to keep clean compared to a full size vehicle. It looks good when its clean, and its not clean in the pics. It won't fit in either of my garages, so I have to rely on a cover to keep it clean(ish). :beer:

So my winch quit while pulling on a stuck truck. I ohmed out the solenoids and everything was fine so I pulled the electric motor. Needless to say its DONE. Question, is a 8074 motor the same as a 8274 motor? I can't find any information on replacement motors for the 8074.

I finally got it back together.. Metal tech cage and seat cradle and new seats. Before: There are pics of the old cage (partially made of chain link fence posts)here: www.outlawdragradial.com/lc13 The metal tech cage is sweet, I highly recommend it. I cut/notched and welded it...

:o Slave cylinder lasted less than an hour. When it crapped, it did so with the clutch disengaged, so I was stranded. Luckily a couple guys helped me push it off the road. I was eventually able to get it to release, and was able to "double clutch" it on home. Re-installed the old one for...

Rebuilt the knuckles, installed the aussie front locker and new clutch master/slave. Ready to cruise!

So I'm thinking I need to buy the drum brake knuckle kit? What's confusing is the model year overlap. E-'75 was drums. 9/75+ was discs. E-1/79 was small bolt pattern, 1/79+ was larger bolt pattern. Why the different kits if it doesn't matter if it's disc or drum as long as it's prior to...

So that's the small pattern, right?

Your Sanity? j/k good luck! :beer:

Pictures and approximate measurements. Thanks for the help! Had to work late and don't feel like tearing into it tonight :|

I have these, can take more tonight if need be. I'm going to tear into it tonight...

Or does it matter? There are different part numbers for the different years...

As the title states, I bought my 40 and it has discs. I need to rebuild the knuckles and want to order the right stuff the first time. Is there any easy way to tell if it has a front disc conversion, or if it has a later model axle under it? Cheers. ...Brady

I have one in great shape, just not on Kauai.. I could ship though.

Chasing down a miss, I pulled #6 spark plug and found this: Not good, LOL! :cheers: