-
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.understood @CMiller just putting that option out there to you in the event it could move things along quicker.....
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.@CMiller bumping this thread for information or if you need a donor vehicle.
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.@CMiller - if you still need a donor vehicle let me know. I can make the trek to your facility easy like....
-
Ddharalson replied to the thread upTOP Overland Roof Rack.Guys this explains the differences between their racks - right off their website - upTop Overland Alpha and Bravo Racks - https://www.uptopoverland.com/pages/uptop-overland-alpha-and-bravo-racks But to crib sheet it - the alpha has a channel to...
-
Ddharalson replied to the thread Bixenon Retrofits and other FullyLitLED products.Guys this explains the differences between their racks - right off their website - upTop Overland Alpha and Bravo Racks - https://www.uptopoverland.com/pages/uptop-overland-alpha-and-bravo-racks They have been super helpful with information as...
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.@CMiller - any luck with your teams evaluation of the skids from Ironman for earlier year US spec 200's? Or an update on timing?
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.@CMiller - fair enough, thanks and makes sense that there may be some differences in what they offer/sell downunder. stronger is always good... Any chance they have a fuel tank skid that can be offered as an addition to the package?
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.cheers thanks @CMiller - i could be a donor truck for fitment checks 2011 200 which would cover the years earlier from 2008-2014 at a minimum..... Just need some warning so I can plan to get over there from Central Oregon... reach out via pm if...
-
Ddharalson replied to the thread For Sale Colorado - Rock Warrior Rings and bolts.thanks, decent shape for those - let me chew on it...
-
Ddharalson replied to the thread For Sale Colorado - Rock Warrior Rings and bolts.@colzonical center cap photos?
-
Ddharalson replied to the thread Parting Out Seattle WA: 1995 FZJ80 White 80 Series with 1FZFE, Grey interior.do you have the rear bumper corner end pieces? trying to fix mine up after a turd in a vw van bumped my teenager in a traffic circle (rim of front mounted spare) causing a small dent/heavy scuff in the plastic - could take both if necessary...
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.Do tell, interested assuming the front edge of the engine skid will mate ok with my bumper.... what's your company?
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.getting some information from Ironman in the next day or so.... will post here when I know more....
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.bumping this thread, stuff is on sale all over the place and if Ironman answer up whether these will work on my rig or forothers, I'm sure they would want to try and take advantage - @Ironman 4x4 USA or @Ironman4x4Bubba
-
Ddharalson replied to the thread Bolt on 80 Series Tire Carrier Compatible with Factory Bumper.neato, also is there anything that holds the swingout open so it can't swing shut? And if you go with the table will there still be a provision for mounting anything along that back panel?
-
Ddharalson replied to the thread Ironman Skid Plates for a 2008?.@Ironman 4x4 USA or @Ironman4x4Bubba - can you add to this conversation to help clear this confusion up - why do you only show the Ironman skids for 200 series fitting 2015 and newer. Whereas your Australia website shows one available for the...
-
Ddharalson replied to the thread Bolt on 80 Series Winch Plate.no problem, still a fair deal to not have to change bumpers to add a winch in a low effort way....
-
Ddharalson replied to the thread Bolt on 80 Series Winch Plate.cheers thanks @GGM - is the discount code still valid?
-
Ddharalson replied to the thread Bolt on 80 Series Winch Plate.a regular dremel and cut-off wheel to trim the bumper down? that's sweet and dead simple... thanks @ETCruiser
-
Ddharalson replied to the thread Bolt on 80 Series Winch Plate.@GGM - this is a really cool simple solution, so thanks for producing. Also, can you confirm that you are shipping these now with the minor changes so I don't have to grind or cut the width down like ETCruiser did to get it to fit properly with...
-
Ddharalson replied to the thread Jowett performance filter housing "Group Buy".order placed, thanks!
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…