I had a couple people ask for access to the zip file of pictures today and somehow messed it up giving access. If that was you, please ask again if the link below doesn't work:
https://drive.google.com/file/d/0B4q8JB51qi_GODJRam91bXBxQUE/view?usp=sharing&resourcekey=0-2wyVOLOibUPuCwzxDuVEeQ
It...
You're welcome. It may not be a big deal for you but our car seats were ... finicky. :) It wasn't something I thought of when I got it and wish I had just so I realized what I was getting into (not that I would have changed my mind.)
How small are your children? If they're in car seats, I'd look for a 100 with LATCH. Makes carseats a lot easier. If they are beyond that (or will be very soon) then either will be very capable. Carseats and non-locking shoulder belts were my main issue with the 80 and small children. They do...
Here are a couple other threads showing just the OEM rear cargo light install. Not nearly as bright as this version but it works for me when using a replacement LED panel instead of stock bulb.
As mentioned, since the wiring harness and mounts are already there, with the OEM light it's...
Well, I just tried to remove the driver side mirror. No such luck.
After a better look inside I can see that the PO of my rig had need of your services but this was before your product was available. I can see that the bottom post is broken, with the screw and a large chunk missing. I can also...
All of the above in my case. One ear and the bottom post.
Is it usual for the gears to be visible when the bottom post breaks? I figured with them exposed like that it would be better to use a different assembly to start with since I had one. It if turns out my driver side is in the same...
I took my passenger mirror off yesterday to get the shakey mirror brackets in place and found this:
I don't see how the post reinforcement gets installed. ;)
Fortunately I already had a replacement passenger side mirror assembly so just swapped them out. It turns out the screws that you sent...
I have had the same issue with my driver rear window. For now, I have just propped it in the up position and removed power. I may try the clear silicone fix though. Cleaning window runs and tightening the track didn't do any good.
Please read the link that I provided above. There is a link to LC Phil's Pin15 mod that should allow you to lock the axles w/o the CDL. You will also want the Pin7 mod I think.
You will need to get a Center Differential Lock switch (and may want to do a Pin7 mod), see here for a summary what this allows you to do: Lockers in high range?
Exactly. I replaced all the mechanics from mine a few weeks ago and you have to mess with a bunch of stuff for that but just to replace the glass it is probably 20 minutes of work. Pull the 2 trim pieces (only need to pull the two short sides), 6 nuts and pop the glass out the top. Reverse to...
Replaced my leaky, no-longer-opening (or quite closing) sunroof with a donor from a '94. Yay!
Didn't even destroy my headliner. Double yay!
Anyone in the Portland area need some sunroof glass? or the shade slider? I don't think the mechanicals I took out are worth anything but the glass and...