Alright, I rechecked everything with a meter multiple times and everything checked good; almost.
The continuity on the third little pink fusible link was sketchy. When I held it firmly I would get a good tone, if I left it loose it would drop in and out. I dug through my spares and luckily I...
So, it’s a 1997 FZJ.
All wires connected.
There is not a CEL with the key in run, didn’t notice that before. What could be keeping this from lighting?
While cranking the Low AT temp and low oil pressure lights illuminated but they went out when I stop cranking.
I can’t remember if you can...
Fusible links connected and voltage checked.
Headlights - check
Dash lights - check
radio - check
interior lights - check
EFI relay - check
Fuses - check
It ran fine before the battery swap, I don’t know what I’m missing here.
My battery was tired and not holding a charge so I picked up a new one and replaced it. The truck turns over strong, but will not start. No other changes than the battery. The truck ran fine before the swap.
I double checked the wires and everything is connected correctly; what am I missing?
I'm Boyd, in Costa Mesa with my FZJ80. I do most everything myself but I did use YotaMasters for my diff gears. There really aren't great options nearby, but always glad to see another cruiser in Costa Mesa!
Damn! The change in dates screws with my schedule. I will be getting off of my wedding cruise the day before CM starts.
Looks like I'll have to take the entire month off ;-)
Sorry for the random reply...
There are several fans that can be used instead of the TRD ringed fan. The 3FE fan fits and an early 4Runner fan fits. Neither moves as much air as the original 3FZE fan.
That's the benefit of the modified diesel clutch. You can use the original fan without...
Who did you use and what do you think of the install/product/quality?
My system was spec'd at 18 panels for about 80% production due to some shadowing from trees and less than ideal roof exposure. I also went with 2 additional panels upping it to 20 (anticipating additional usage.) I'm...