It seems to be common topic among enthusiasts who have made some mods to their beloved truck. From another site, the same discussion which talks about the A/C Water temp switch in the Service Manual and snip-it from the manual attached. This...
Brilliant work, @gonzopancho. I can personally attest to the quality as I have been a test mule for development.
The amount of work and detail to reproduce and improve what I believe to be the gold standard header for the F/2F is amazing.
It...
The terminals release from the fuse box fairly easily, you need to have a pick to release the lock tabs. They make tools specifically for this, I’ve always has good luck with a small flat blade precision screwdriver. There’s some good info on...
@Gun Runner 5 it's a 1995 Subaru Sambar. The only 4 cylinder kei truck variant I believe....5 speed, push button T case, crawler low gear, and A/C. It's the perfect little ranch truck. I just taught my 10 year old daughter how to drive it...
I owned this truck several years ago- it's actually the first land cruiser I ever drove back in 2013. @stridertexas has owned it TWICE - I bought it from him around 2019.
Under my ownership I replaced the driver's side knuckle and did a...
As you can see, that rear hoop is used. I’d be surprised if you get the pieces that go above the doors. I think I was the last person to get them as they can’t find them used.
The other bars are fairly easy to replicate as they are basically...
1990 Toyota Land Cruiser FJ62 is powered by a 3F-E linked with a five-speed manual transmission (H55) and a 34mm transfer case from an FJ60 (manual linkage and not vacuum transfer).
The truck has been in Central Texas its whole life, except for...
A lot of thread drift in this tech discussion. Car is in US now, so importation issues are for another thread. It is clearly a H15x transmission as ID by case and t case.
TIG welding the transfer case plug is best solution. Transfer rear case...
And Onur, I rode a Kona Fire Mountain (my first MTB!) fully rigid that I converted to fixie back in the late 90s… I found a magic gear that worked with the vertical dropouts and it was something like 46 x 17 on the hilly streets of Pittsburgh...
I have 99% finished a monstercross build on a frame that I’ve had for over a decade. It started life as a single speed 29er, someone cut it for a belt drive, and I’ve ridden it as a belt drive, a drop bar monstercross, 1x11 mountain bike, and now...
I wanted to share a set of "enhanced" repair manuals I've been compiling. If you're Type-A like me, these will hopefully help make your life easier by better organizing everything so you spend less time searching for the info you need.
These are...