Recent content by bigjer

18” tundra wheels, TB crank & 1.25 spacers in rear

Hooker aero chamber muffler is the way to go, no interior drone at all and sounds good.

I had some vibrations when I pulled my trailer, 12' with a RZR 4 on it, bad at acceleration and went away when not pulling. Installed diff drop, same thing, then found the grease zerk on the slip yoke of the rear driveline was broke and it was dry. Greased it and the vibrations went away. Also...

I have some Firestone winter force at 285/75/16 that are almost new, only thing is they have studs in them. 4 of them.

Ome 860 rear. Not sure what the torsion bars are, Ome nitro shocks and about 200 lbs of stuff in the back.

Mine is 22.25 front and 23.25 rear on my new 02 100 series, old man lift.

I have 2 of these tires. THey have about 5000 miles on them and about 85% tread. i would like $200 for the pair, buyer pays shipping. would take trade for a fly rod.

are these switches interior or exterior of the transfer case. Can you find them and fool them to turn off the traction control?

stopped by the dealer the other day to see if there was a traction control switch for my 08 fj. After looking at the computer, it showed that there was a slot for tracion control next the diff lock. Top left. parts guy said that if there was wiring for it all you would need to do is buy the...

Banks option Banks just came out with a cat-back system for the fjc. Not sure on the price but banks makes good stuff. They claim no interior noise.

As for the install it was a sob. the nuts on the underside of the roof fell off and I had to remove the head liner and I had to use lots of silicone. As for the wind noise, ARB makes an air-dam for the front of the rack andit seems to cut down the wind noise quite a bit- sells for about $90...

I will take a trade for some all-terains

if you have problems with them make them send them back. Buy the warenty on the wheels, in my experience it has been worth it.

I run the American Racing (Chrome Trench) with the stock backspacing in a 17X8 with no rub issues. Make sure that you order a hubcentric wheel for toyota or you may have issues with vibration. I had that problem on a tundra that i had.

I can send pics on request. I will take best offer if reasonable