Recent content by bhagga424

Awesome thank you for these great documents. At the ecu I'm not getting any voltage at the BATT terminal. Fuse is good. Tried to run a continuity test between this terminal and the fuse and i keep getting an open circuit. The ground pins check out so far.

thanks for your response. I've been tracking down the grounds and I can no longer find any missing. Two of the legs on my fusible link had cracked insulation and corrosion. I replaced those legs with some regular wire for the time being while the new link comes. I have been using a multimeter to...

very very late but this issue was two parts. The CEL bulb was bad, I replaced that to finally read trouble codes and it was improbable crank data. I got a new dizzy and problem solved

Hello all, I recently rebuilt my engine and dropped it in the cruiser. Been hooking everything up and attempting to get life back in this thing. I've been doing quite a bit of testing and checking yet the ECM seems to not want to be in a ready state. I am mostly wondering if anyone knows the...

I've been having trouble with my 80 it started out not wanting to restart after driving and would have to sit, cool down in order to re start. I let it sit for a day or two and then It wouldn't give spark at all. Finally got it started again with a new ignition coil, wires, and plugs. Once it...

Just checked, I've got battery voltage at the diag port

Oh very interesting I haven't tampered with the MAF before. After seeing that thread I did go unplug it (via the connector not the screws) and even an unplugged MAF wouldn't trigger my CEL

Yes, correct

Checked 'em all all for continuity they check out, but they do have a small amount of corrosion visible inside. Could that really cause a no spark?

I've been chasing my tail for a while trying to resolve a no spark issues I've replaced the plugs, wires, ignition coil and igniter. A little bit of novice diagnosis on my part. I have not been getting anything from the CEL and have even jumped the OBD port to get a code, no light. I've noticed...