Excellent, thank you. I went to the site and they indicated they'd be back on the 25th, so I'll definitely pick one up once they're back. thanks again.
Hi All,
I have an 11/72 FJ40 and I'm looking for a replacement outer rubber transmission boot cover. As folks know, the opening on the transmission hump cover changed between 71 and 73, and no one seems to stock an OEM or aftermarket boot for this one year. I did see the below on ebay and...
Thanks for the response. I'm going to keep working on freeing it up as I feel the same as you about throwing something out. I'll keep you posted and if I can't get it free, I'll pull the parts noted. Anything I don't keep will be free to a good home provided the shipping cost is covered...
Hi All,
I have a F155 engine available for anyone who wants it. It turned over when it was given to me many years back, but after sitting idle these past years (in a garage), I can no longer turn over the engine. Others have told me it's probably due to moisture causing surface rust between...
I'm looking to get rid of an F155 engine which was given to me many years back. The engine appears to be frozen as I can't get it to turn with a socket wrench attached to the crank shaft. I recall it turning over at the time I picked it up, but no amount of standing on a breaker bar + pipe...
Love the designs and ideas. I went the easy route and just mounted a Tuffy cup holder to the front of the console (Standard Drink Holder). It fits good and standard cups and water bottles don't hit the shifter. I have a second one I'm planning to mount on the rear swing out door behind the...
Hi,
I'm trying to locate the stock Carb inlet nipple that connects the hard line from the pump to the carb -- see pic. SOR has a used one available, but it they want $27 plus shipping.
thanks,
Brian
...truly awesome work...
Regarding the inner boot, I have an 11/72, which has a slightly different cut-out. About a year back I picked up a used Inner boot (model 9/73-1/79) and I had to cut it a bit and force it to fit. It's better than nothing, but does anyone know if they made a inner...
I installed 5.25" speakers in the front mounted just under the dash using metal brackets. You can hardly see them unless you're looking for them. In the rear, I have two 6x9s in boxes to the left and right of the rear heater on the floor in standard truck boxes. I can share pics if...
How would these compare to basic shocks you get from Napa for a stock setup, for road use vs. off-road? I purposely went with a basic shock with the thinking that it would give the best all around ride on the road, but if there's a better mouse-trap out there, then I'm interested.
It looks like there are two different throttle assemblies, including one from 9/69-12/74 and one from 1/75-7/87. From the pictures I've seen, it looks like the earlier version has a hole in the center plate upper side, where as the later does not. The throttle body that I had on my 11/72...