I agree with Rednexus. You can get the stock lug nuts from your local Toyota dealer......probably cheaper than at the Lexus dealer. You could also check with the Windy City Cruisers (I don't know where in IL you are in relation to them) but...
@Wildcat Walker Not sure what the view button is but this is where I put it. You can always just drill a small hole in the dash like I did for some of my lights (small circular switch to the right).
I use this throttle controller on my 2013 and love it. Plenty of settings to choose from. I know it says 2014+ but it works on all years. I spoke to the owner and asked why he had it labeled for 14+ and he said he just didn't have access to a...
I think my zero turn was designed by Chrysler, in order to replace the transmission drive belt and cooling fan I had to remove the transaxle. So much for quick and easy.
Crawl Control is AMAZING at what it does. I purposely got myself stuck in the sand at a sand pit not long after installing it and it got me out without much issue. Having said that, when you put it in the lowest setting, it makes all kinds of...
At the top of the arch it's just over 44". I have a fridge, plano box and aux battery mounted back there so I couldn't get an exact measurement. I also don't have the 3rd row installed but the plywood base I made was cut to 42" and fits nicely...
Thanks for all the info and pictures. I've got a couple water jerry cans and a Reliance 7 gal cube that I use on trips. My water pump is supposed to deliver today and I will get to put it to use in about 2 weeks. Perfect timing.
I most definitely did not :)
Another option would be to rent a 5th gen T4R (Enterprise does have them sometimes) and swap the 8" for the 8.2" in my driveway.
Would anyone ever even know?
I found the Dobinson's recommended default settings on the MRAs way too stiff on compression and too fast/bouncy on rebound. The compression adjusters are easy to mess with but the rebound is annoying to get to, which is one of my only complaints...
I bought it from a friend with the MRR lift already installd. From day 1 I have felt that the ride is "harsher" than it should be for an IFS rig, but this is my first IFS rig and I've never ridden in a stock 460. Having said all of that, I...
I run 1.25" spacers on all 4 corners for rub issues and I don't like the way the stock tires are tucked under the fenders. I am on a 2.5" Dobinson's lift, Dobinson's UCA's and running 275/70R18 MT's. I get a little rub on the plastic from time...