I have several cheap 12V sockets I got off Amazon that I have had no issues with. Currently running a SetPower 80qt in the rear of the GX. This is one of the brands I have.......https://a.co/d/9iJQ01H
At the rear. I had trimmed a bunch of plastic off at the base of the sideskirt/rear fender to stop rubbing with my previous 265/70/17s. With the 285s, I haven't had to trim anything else, but it looks like I may need to ziptie the rear of the...
Budbuilt skids have load bearing hatches on the front and engine skids so you can get to drain plug and filter without pulling whole plates off. They are one of the few companies that does a dedicated GX460 plate set and they work great. I think...
I keep going back and forth between 0 and -10 offsets. I think something like a +5 would be perfect, but there aren't many wheels worth purchasing that come in that size. The RPT-1s look great though!
Nothing like having a good Cottonland meeting and pulling on you street to find a downed tree and power lines. Waiting for the OK front Entergy and then I’m dragging this big f-ing tree out the road so that I can go to bed.
So after replacing the vacuum switching valve the emissions codes have gone away. So finally after that, an OEM MAP sensor and OEM gas cap I'm code free.
Other than that only other update is I needed a way to mount my fire dept pager so that I...
I'm running 33" MT's. They were on the rig when I bought it from my friend and I've never been in a stock rig or one with stock size tires so I have no comparison.
This is the best I can do with that picture.
And that's what I would be afraid...
I will start off by saying that I don't understand anything about power bands and torque converter lock-up and shift logic and such. I did install a throttle controller a while back and while this has helped with pedal response, it does not help...
Well basically they kind of knew that I was doing it just for looks. There really isn't any place to off road in Wisconsin. So really the GX 460 is perfect for me right out of the box. I know this, but wanted a different look, and thought...
Understood. I think what you meant is tampering (intentionally lowering) is illegal, which I agree is the case. But it is not illegal to program ex for replacement purposes so I think we're all on the same page now.
Why not just pull the 3rd row out and use a plywood deck? Makes things that much easier and if GX460sd had done that, his fridge cover wouldn't be hitting the glass. Besides, it's not that easy to put all that stuff in and out of the rig if you...