audi2nr's latest activity

Out at our friends cabin this weekend. Feels good to recharge

Shout out to @ToyotaMatt for hooking this up.

Thanks, I sent both PM's.

how much did that run you?

Drove it to the hardware store and got lucky in the ammo dept.....

I think they are great. They were pretty cheap on amazon, they throw out plenty of light and the contrast is nice. I did order some 9006's for the low beams to try but I say go for the high beams for sure.

Got some Hella yellow 9005 bulbs for the high beams. Then proceeded to show the peons at the mall who's boss 🤣🤣

Very interesting, would you able to procure these items for me?

These are still available??? I thought otherwise?

me

It's a nice kit, luckly got it on a 4th of july sale, the rods/tre's are bare metal, I cleaned mine well and then sprayed them black then hit with clear. I had to run a tap down one of the ends fyi, also there are no wrench flats to use as a...

Been enjoying the truck a lot so far, picked up a long block on the cheap as a base to do a full engine build. Started taking it apart and was curious on what the piston and rod weights were and man was I surprised, rods came in right around 900...

Thanks for the heads up!!! :beer: :cheers:

Hey do you still have the exhaust manifolds? And intake manifold? What year are the is everything out of? Thanks!!

Fed ex ground and ups ground to 98275 are both around 43$ with provided dimensions a weight guesstimate of 15lbs not sure if that's accurate??

I’ll check tomorrow, I’m pretty sure I remembered seeing them on the shelf

Mounted up 4 Yokohama 315-75-16 MT G003 on a spare set of LX rims....I like em ;)

Are the exhaust manifolds still available?

Looking for a set of good 95-97 1fz manifolds, preferably in washington state shipping might cost a lot.. thanks

Found a long block to rebuild for 100 smackaroos I said hell yes!

Not 315's but just for some sort of gauge.. my 295/70/17's are advertised as having a 33.5 overall diameter and when not mounted i would agree but with 38-40 psi and weight on them I am measuring around 32.5" i have around 1000-1500 miles on em...

10 miles in and this feral pig of a fir tree was across the rd...cut a section out of it and winched it to the side...onward and upward ;)

Some new snow in the Sierra, did about 30 miles of it, aired down to 15 psi being that it was very dry snow Snow day is not complete without a campfire to warm by... Snowing with the sun setting, just awesome!

Added some 1/4 plate to give it more strength and some side attachment points. It bolts through the side of the ARB bumper using the captive frame nuts.