I need help I need help identifying my starter. I have a 95 so I thought for sure I would have a 2.0kw. Mine appears to have the casing of a 2.2kw but it has 10 splines. What starter do I have??? The new starter in the picture is a 2.0kw reman
I just read from the first post that Amsoil is not a good choice for cold weather environments. Can anyone share their experience? I just completed an axle service with new birfs using Amsoil...
My radiator has now let go. It looks like it is leaking fairly extensively along the top tank seam. Before I replace it with a new radiator I would like to resolve my radiator sludge problem.
I have read most if not all of the posts on this issue. It does not seem like there is a consensus as...
Recently my remote door lock stopped working. I can still lock the doors with the door switch. It's not the end of the world but I have a compulsion to fix things that don't work. Any suggestions on where to start?
Mine had a clear knocking sound but was still working. Denso is the OEM unit so it will last another 200k. I had it installed about year ago. I don't have the equipment for AC work or I would have done it myself. The expansion valve is in the dash but even that does not look too difficult...
I take it you mechanic didn't tell you what was wrong with the compressor. I think the most common failure is the pulley bearing. At least that was what was wrong with mine. You can replace just the bearing if the compressor "nose" is still good. Mine was shot and I had to replace the whole...
Update
I think Ive traced the source the the multi function unit. Apparently the multi function unit is a small computer board made by Lucas that controls many of the electrical functions. After swapping batteries I was able to get it started but I have lost most of the electrical systems in...
I use a similar method with vacuum line and 32 oz cup filled initially with about 1/2 inch of fluid. Just make sure the line is submerged. I've been bleeding brakes that way for 20 years and never had an issue.