nomadsurfer

At the Shell at Indian school road and the 101 Way cool 70 5speed with efi 4.5 both bench seats in the rear very nice rig! Cool guy!

An alternative for the oil pan is to use a cutter. I've linked a $12 Taiwan knockoff of the $100 OTC tool below. Works great...

I would drop modifying a f series engine on anything bigger than a 40 series. Your starting off with too big of a vehicle with a engine that is limited to begin with. I did bring up recently the gm 4.2 i6 motor recently as a swap possibility...

Post 2 of 2.

From another thread: Transfer case shifter detent springs: 90501-16115 A great easy and cheap first step if your t-case is popping out of gear. Toyota released a TSB about this, apparently the original springs were too soft and let the shifter...

all the Ignition Locks that go out from here on forward , will have all the face TEXT / FONT 's dialed in with a industrial black D.T.M. oil base enamel .... i have seen a few 69057-90800 's now in OEM 69005- Kits lacking this details that...

Could be many things, but resist the temptation to mess with your steering box until you've done everything else. FJ60s especially and FJ62s, as you lift them go to very low caster numbers. This makes them squirrely, and nearly undrivable on...

Gates catalog. I bypassed my rear heater and used 3 of the Gates 28466 hoses to do it, which you can see all 3 here, cut as needed. If you're still using the rear heater then you'll need 2 of those and you'll probably need to google search...

Couldnt remove my spare tire no matter what I tried. I think its been there since it was made. So I just took the whole dang thing off, so much easier.

i went with a wheelskins as well. went with the charcoal with perf sections. it works well.

Wheelskins out of Berkeley, Ca is a reputable company. I have their product on my Tacoma and 60, lots of colors.

I am still in the process of playing heater hose bingo. missing about 4 of the ones back by the firewall.

I would be interested for a late 62. the Wits End one does not fit due to a wire harness location.

Finally getting off my a$$ to post this. I've been working on a replacement glove box for the FJ60's for way too long. I know Wits End has discontinued his aluminum glove boxes so I thought I would see if there is any interest in a 18ga powder...

I swear Tucson is the pinnacle of clean 60s

Not a cruiser, but man do I miss these.. I had a few vans when I was in Japan, hard to beat a turbo diesel, AWD, real frame. I hauled my dirt bike all over and was able to camp out of it. If I had this option in the USA it would easily replace my...

Thanks to Torfab for putting this excellent kit together. Lighting is excellent and the install was easy.

All 4 on like that looks awesome

Here are some pics.

Hey y'all I moved to AZ a couple of years ago, figure it's about time I try to join the local cruiser club. I have an 85 fj60 it's mostly stock with a few mods. It was my grandfather's, I inherited it after he died. Hoping to find some people to...

Making my intro here: My name is Jeff. I own a 1983 FJ60 that is crusty and rusty. My wife, Kaylee, and I both work for Peoria PD. In addition to that we own BlasterTactical.com. Looking to meet some LC friends and turn some wrenches. If you're...

spied these two in the foothills of Tucson.

I am 50/50 tonight if I can breakout