A local member swapped his front grill and other parts so he could run those same lights. The improvement was even bigger than in his 40 series. Not stock, but neither is the RHD->LHD swap he did either. Now his JDM diesel 60 series is LHD and...
I replaced my sealed Sylvania Halogens with the Toyota Koito kit that everyone has been raving about, still can’t believe it’s only $16! Install was very easy, results are amazing - low beam before and after pics are below, I wish I had done the...
After seeing @wngrog add some 4.8” Man a Fre shackles on the Seminole Red build to improve the stance I decided to follow suit. My front end has been a little low since adding the 8274 a few years ago but I was pleased with the ride and didn’t...
I managed to get it all back on today without scratching it up. Powder Keg knocked it out of the park. Everything looks perfect.
I’m taking it to Its Vinyl Tuesday to get the stripes repaired. Jason really really did a great job blending in the...
Cleaned and painted seat frames and brackets put on my Cruiser Corps seat covers but before I finished it all up I brushed my Buddy Thunder put some of his fur in a vacuum bag zip tied it into the passenger side back rest so we can go for rides...
Awesome, that’s what I’d figured but thanks for confirming! My OME shackles are a little under 3” so the 4.8” Man a Fre’s should net me an inch of lift.
Do you know if these shackles will work with Old Man Emu springs? I’d like to lift the front of my 40 an inch or so, I realize I’d could upgrade to heavy springs but this seems like an easier solution. I’ve got 4 degree shims also so caster...
Thanks, it’s grown on me a lot over the years. Looks a lot more olive now, the pic below is the day I bought it - the paint was really oxidized and looked like a faded brown. Multiple applications of Meguiars #7, all by hand, and letting it soak...
Finally replaced the old KM2s with the updated KM3s, absolutely amazed how much better it rides with fresh tires! Also put in a little elbow grease with some Meguiars #7 to get the paint shining a bit better and sealed it with Liquid Glass. Mr. T...