The passenger side view, not too bad looking, I think anyways.

The passenger side view, not too bad looking, I think anyways.

  • 0
  • 0
The drivers side again

The drivers side again

  • 0
  • 0
Side view of the drivers side. Sitting up close to the body

Side view of the drivers side. Sitting up close to the body

  • 0
  • 0
DSCN0892

DSCN0892

  • 0
  • 0
DSCN0890

DSCN0890

  • 0
  • 0
DSCN0892

DSCN0892

  • 0
  • 0
DSCN0890

DSCN0890

  • 0
  • 0
I started with a set of 78" Trail gear rock sliders. Bought on sale from Trail gear for $133 to my door.

I started with a set of 78" Trail gear rock sliders. Bought on sale from Trail gear for $133 to my door.

  • 0
  • 0
Used a 1 3/4" bi-metal hole saw I "cut" one in half, thus providing two 38" pieces. I will weld the 8" pieces from the rear bumper build on the fish mouth and end uo with a 40" slider

Used a 1 3/4" bi-metal hole saw I "cut" one in half, thus providing two 38" pieces. I will weld the 8" pieces from the rear bumper build on the fish mouth and end uo with a 40" slider

  • 0
  • 0
The other one is going to get sectioned to 60" and then mounted as a rear bumper. Im going to take 8" out of the middle section and then 5" from the two end sections.

The other one is going to get sectioned to 60" and then mounted as a rear bumper. Im going to take 8" out of the middle section and then 5" from the two end sections.

  • 0
  • 0
mrjay2u

Slider Build

Building a set of 40" sliders out of the Trail Gear 78" rock sliders.
Click to expand...
There are no comments to display.

Album information

Album owner
mrjay2u
Date created
Item count
10
View count
569
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

mrjay2u

mrjay2u

Media items
107
Albums
7
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top Bottom