- Location
- United States
UPDATED: Jan 2015:
For sale sheet: https://docs.google.com/spreadsheets/d/14idyiJgCQc8H0vlo-eb-eaLewZkKP6mAY9H0Q2vEkH4/edit?usp=sharing
Original first post:
OK. Bear with me, this will be a little complicated, but I'm posting it now so you can subscribe and call dibs if you want, and as I update you'll get email notices. Truck is fully functional (actually the 2nd row drivers-side window regulator has fallen off tracks last month for the first time) other than that, it's a solid truck, gets wheeled, goes and goes, maintained/services, weekend play thing. A picture you say? sure, here it is a few years back at a Fall Crawl event. Silver/Blue 2 tone paint. Power everything, AC/heat and rear heater works fine. No need to mention the replaced PHH or new head gasket as I'm keeping the driveline...
Paring out "much of" a 1993 80 Series. But not all of it. In short:
* not the frame
* not the lift, suspension, steering, transmission, lockers, transfer case, 17" wheels, 37" tires, or basically anything under that hood or that makes it go.
* what's left:
1) some will be sold in Virginia (as much as I can sell "early" in Virginia from 10/1 - 12/31)
2) the balance of the truck and parts (except for the stuff that is not for sale) will be sold/available in January when the truck is in colorado springs (things like the body panels, windows, seats - although the seats may go in VA, we'll see).
In short anything I can sell in the next 2 months while it's in VA will sell, but I need it to run (runs fine now) and be able to be put on a car carrier from VA to CO. So things like the windows and doors are definitely not coming off of it until it hits Colorado Springs, CO.
Some additional stuff that I will list beyond "what's above the frame and not driveline" on a stock 80
in VA:
1) icom IC7000 ham radio and antenna (keeping my CB and handheld ham)
2) tradesman 80 series full roof rack (gutter style mounts)
3) 5 stock 80 series 16" rims
4) 3rd row seats from a '97 (so the light gray leather, they do NOT match the new dark gray fronts/middle rows)
5) lightforce 240mm blitz lights, with diffuser amber covers and slee wiring harness
6) ARB winch compatible bull bar (could go in CO also)
7) ARB like RTT (they all seem to come from the same factory) seen below on my trailer
8) maybe my m101 trailer, maybe not. it's the white one with matching wheels (yes, 37" on a trailer so i can share a spare)
9) water bladder system that goes in the rear quarter panels, never installed
10) arb roof rack mounted dual jerry-can holder (holds 2 with 'metal-band' over the top)
in CO:
1) IPOR skid plate (belly plate doubles as trans mount)
2) front buckets and 2nd row recently covered in Aatlasx amazing leather with heated seat elements, and front edge pockets for front 2 seats, dark gray. Matching center console leather arm rest, 2 front door arm rests and re-covered leather steering wheel. buying this leather package already on the seats will save you massive pain and suffering by not needing to put them on your own seats
3) possibly rear bumper with swingout arm (if we don't reuse that)
Pricing - coming soon, i'm building a new/market/used matrix so i know how to price it.
"how much for XYZ to my zip code" - you want low prices right? then please go here: https://www.fedex.com/ratefinder/home and enter in "22101" for the source zip code and then your own zip code and the weight of the item you're looking to buy and price it and we'll add that to the price i list for the item. You may want a few parts so it's only 5 min out of your life to get that price, if i'm selling 500 pieces off this thing spending 2000 minutes to give shipping quotes is not something anyone would want to do
So we will do first come first served, paypal accepted, iyou pay for shipping, insurance optional and up to you to ask for and price in the tool referenced above. I have plenty of references I can provide so you can confirm I'm not a scammer. I'm also selling a sweet Georgia Precision custom 308 rifle (George Gardner's personal former hunting rifle) he made 2 of this model for himself and this one is for sale, new carbonfiber barrel, unshot, Ti rem700 action, etc, etc.
Google is everyone's friend so make reasonable offers and let me know if i'm off base by providing links. I have 3 months to sell things so not in a huge rush, but want to get er done over the next 90 days. Post here for specific items you want dibs on. Email me via the user CP (goes to my paypal verified email address) for questions you'd rather speak directly about. I and the Truck are in VA now, meet ups to inspect and view any parts you want are cool with me, cars and coffee in Great Falls, VA early saturday mornings would work.
Thanks for reading this far.
For sale sheet: https://docs.google.com/spreadsheets/d/14idyiJgCQc8H0vlo-eb-eaLewZkKP6mAY9H0Q2vEkH4/edit?usp=sharing
Original first post:
OK. Bear with me, this will be a little complicated, but I'm posting it now so you can subscribe and call dibs if you want, and as I update you'll get email notices. Truck is fully functional (actually the 2nd row drivers-side window regulator has fallen off tracks last month for the first time) other than that, it's a solid truck, gets wheeled, goes and goes, maintained/services, weekend play thing. A picture you say? sure, here it is a few years back at a Fall Crawl event. Silver/Blue 2 tone paint. Power everything, AC/heat and rear heater works fine. No need to mention the replaced PHH or new head gasket as I'm keeping the driveline...
Paring out "much of" a 1993 80 Series. But not all of it. In short:
* not the frame
* not the lift, suspension, steering, transmission, lockers, transfer case, 17" wheels, 37" tires, or basically anything under that hood or that makes it go.
* what's left:
1) some will be sold in Virginia (as much as I can sell "early" in Virginia from 10/1 - 12/31)
2) the balance of the truck and parts (except for the stuff that is not for sale) will be sold/available in January when the truck is in colorado springs (things like the body panels, windows, seats - although the seats may go in VA, we'll see).
In short anything I can sell in the next 2 months while it's in VA will sell, but I need it to run (runs fine now) and be able to be put on a car carrier from VA to CO. So things like the windows and doors are definitely not coming off of it until it hits Colorado Springs, CO.
Some additional stuff that I will list beyond "what's above the frame and not driveline" on a stock 80
in VA:
1) icom IC7000 ham radio and antenna (keeping my CB and handheld ham)
2) tradesman 80 series full roof rack (gutter style mounts)
3) 5 stock 80 series 16" rims
4) 3rd row seats from a '97 (so the light gray leather, they do NOT match the new dark gray fronts/middle rows)
5) lightforce 240mm blitz lights, with diffuser amber covers and slee wiring harness
6) ARB winch compatible bull bar (could go in CO also)
7) ARB like RTT (they all seem to come from the same factory) seen below on my trailer
8) maybe my m101 trailer, maybe not. it's the white one with matching wheels (yes, 37" on a trailer so i can share a spare)
9) water bladder system that goes in the rear quarter panels, never installed
10) arb roof rack mounted dual jerry-can holder (holds 2 with 'metal-band' over the top)
in CO:
1) IPOR skid plate (belly plate doubles as trans mount)
2) front buckets and 2nd row recently covered in Aatlasx amazing leather with heated seat elements, and front edge pockets for front 2 seats, dark gray. Matching center console leather arm rest, 2 front door arm rests and re-covered leather steering wheel. buying this leather package already on the seats will save you massive pain and suffering by not needing to put them on your own seats
3) possibly rear bumper with swingout arm (if we don't reuse that)
Pricing - coming soon, i'm building a new/market/used matrix so i know how to price it.
"how much for XYZ to my zip code" - you want low prices right? then please go here: https://www.fedex.com/ratefinder/home and enter in "22101" for the source zip code and then your own zip code and the weight of the item you're looking to buy and price it and we'll add that to the price i list for the item. You may want a few parts so it's only 5 min out of your life to get that price, if i'm selling 500 pieces off this thing spending 2000 minutes to give shipping quotes is not something anyone would want to do
So we will do first come first served, paypal accepted, iyou pay for shipping, insurance optional and up to you to ask for and price in the tool referenced above. I have plenty of references I can provide so you can confirm I'm not a scammer. I'm also selling a sweet Georgia Precision custom 308 rifle (George Gardner's personal former hunting rifle) he made 2 of this model for himself and this one is for sale, new carbonfiber barrel, unshot, Ti rem700 action, etc, etc.
Google is everyone's friend so make reasonable offers and let me know if i'm off base by providing links. I have 3 months to sell things so not in a huge rush, but want to get er done over the next 90 days. Post here for specific items you want dibs on. Email me via the user CP (goes to my paypal verified email address) for questions you'd rather speak directly about. I and the Truck are in VA now, meet ups to inspect and view any parts you want are cool with me, cars and coffee in Great Falls, VA early saturday mornings would work.
Thanks for reading this far.
Last edited: