Hi fellas,
i put a boost gauge on a while back but didn't hook it up correctly,i was losing pressure.
I haven't had much time to look at it lately but i had a fiddle last week and this week.Ive replaced all vac lines,today i finally got the fittings for the boost gauge.
Last week i ran compressed air into boost gauge to check its working right,yes it is.
I ran air into wastgate pipe,it seemed to work ok but the bracket on the wastgate does flex a little
So today with the boost gauge hooked up right etc i took it for a run,we live on a mountain and 2nd gear under load 2-3000rpms i can manage max 4psi.
I have a boost controller on the way and i shimmed the wastegate about 5mm last week to see if it helped.
Its a 12ht factory fitted sahara,new fuel filter today also.
What going on,factory is 7-8psi.
Any thoughts are welcome
i put a boost gauge on a while back but didn't hook it up correctly,i was losing pressure.
I haven't had much time to look at it lately but i had a fiddle last week and this week.Ive replaced all vac lines,today i finally got the fittings for the boost gauge.
Last week i ran compressed air into boost gauge to check its working right,yes it is.
I ran air into wastgate pipe,it seemed to work ok but the bracket on the wastgate does flex a little
So today with the boost gauge hooked up right etc i took it for a run,we live on a mountain and 2nd gear under load 2-3000rpms i can manage max 4psi.
I have a boost controller on the way and i shimmed the wastegate about 5mm last week to see if it helped.
Its a 12ht factory fitted sahara,new fuel filter today also.
What going on,factory is 7-8psi.
Any thoughts are welcome