LED amber lights (1 Viewer)

[FullyLitLED]

Does anyone know of any reliable amber LED lights for the 100 series turn signal? I'm not sure if they exist but it's worth asking

 

[pman]

Putco is supposed to be pretty good

 

[1loudLX]

I've got em. try superbrightleds.com

not sure where I got mine but mine work.

You need 1157 dual element "bulbs".

 

[FullyLitLED]

I've got em. try superbrightleds.com

not sure where I got mine but mine work.

You need 1157 dual element "bulbs".

Super Bright LEDs - Brake Light, Turn Light and Tail Light Bulbs

there are a lot, which ones would you recommend from this page?

 

[tkorade]

I emailed them last week about getting lights for my HJ47 and he said first to use the LED color that matches the lens color, second is to measure how much room you have in the casing and then put in the highest number of LEDs that will fit. The dimensions of the bulbs are on the web site.

 

[kyoso23]

I second SUPER BRIGHT LEDS - LED Lights & Accessories. You will need to add resistors or a modified relay so you don't get tweeker blinkers.

 

[anthonycds]

I used to get my LEDs from Superbright and Autolumination. I recently started buying from V-Leds to replace burned out ones and haven't had any problems since.

V-LEDS.COM | LED Dome, Map, License Plate, Reverse, DRL, Turn Signal, Brake Lights

btw, they have a sale goin on right now

 

[FullyLitLED]

I used to get my LEDs from Superbright and Autolumination. I recently started buying from V-Leds to replace burned out ones and haven't had any problems since.

V-LEDS.COM | LED Dome, Map, License Plate, Reverse, DRL, Turn Signal, Brake Lights

btw, they have a sale goin on right now

no modifications needed? (soldering, etc)

 

[anthonycds]

no modifications needed? (soldering, etc)

I have yet to modify anything when it comes to installing LEDs.

I myself don't have any LED turn signals as of yet. You can however choose to solder the resistors needed when installing 1157/7440 led bulbs or just use the supplied splice taps.

 

[1loudLX]

change the flasher out instead of adding resistors. You add LEDs to reduce load, why put it back?

 

[anthonycds]

change the flasher out instead of adding resistors. You add LEDs to reduce load, why put it back?

Ya you can do that too, forgot about that.