removing tray from fj45 (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

"tray"? What is the tray? This is not a term I'm familiar with in regards to a Land Cruiser. Or for that matter any truck or car.
 
Well... my Canadian bed came off with 10 bolts. More accurately, after I drilled through the heads to weaken them and used an air chisel to snap them off. I would imagine the tray would be mounted to the same brackets off the frame. Three each side rearward of the axle and two in front.:wrench::wrench:

The wet spots (penetrating oil) are from trying to loosen the bolts up.
HPIM1958.jpg

HPIM1957.jpg
HPIM1958.jpg
HPIM1957.jpg
 
I was able to unbolt mine from from the factory mounts. However my old 40 had the tub welded to the frame. Depends on how it was constructed. Take some pics and post them up.
 

Users who are viewing this thread

Back
Top Bottom