matt.mcinnes
2F-ETI
Measured the two dizzys I have at work and over all though side buy side they look a little different I recon the 3F-E dizzy will fit a 2F block.
Now saying that there were a few minor differences.
The 2F dizzy measured to the point where it seats in the block 122mm from the tip that locates in to the oil pump. The 3F-E dizzy measures 120mm which means when bolted up their is 2mm less engaged to drive the oil pump.
The gear all though the same distance from the tip of the dizzy will sit 2mm higher as well.
The easiest soloution seems to be to strip the 3F-E dizzy down and machine 2mm off where it seats to the block. Not too hard to do.
Before I go down that road does any one have a 2F dizzy laying around they can measure for some comparrisons.
Now saying that there were a few minor differences.
The 2F dizzy measured to the point where it seats in the block 122mm from the tip that locates in to the oil pump. The 3F-E dizzy measures 120mm which means when bolted up their is 2mm less engaged to drive the oil pump.
The gear all though the same distance from the tip of the dizzy will sit 2mm higher as well.
The easiest soloution seems to be to strip the 3F-E dizzy down and machine 2mm off where it seats to the block. Not too hard to do.
Before I go down that road does any one have a 2F dizzy laying around they can measure for some comparrisons.
Last edited: