Hey, can somebody help me, please. I lost my clutch on the way home the other night, from the Badlands cruise. No biggie , or so I thought. I didn't think it worth mentioning until tonight. When I got about 3/4 of the way home I felt a spongie pedal. I checked and the master cylinder was dry. I filled it and drove home. Found fluid all around it and bought a new master. I put it on tonight ( as I have done several times before in my life) and no pedal. I bled it a second time. No pedal. I pulled the slave, flushed the line, took the slave apart and cleaned it. I put it all back together and bled it, no pedal. I blead it again, no pedal. I took it all back off, inspected it, (master, slave) and put it back, still nothing. Any thoughts on how I could have screwed up something so simple? I thought the possibility of bad parts, but each tested good on the bench. Help?! I have been at it since 8:30pm it's now 1:30, and I am covered in brake fluid. I'm hitting the showers. Any help would be appreciated. (It's an 85 Toyota truck) Thanks, Tony.