For Sale-delivery to Roundup (1 Viewer)

[Texican]

Got stuff to sell and deliver to the Roundup?
Post it here along with a price............
Or free stuff post it here...........

 

[fj40charles]

Stuff for sale...

Halon fire extinguishers.. 10 lb model. Charged and tested. $45.00 each

FJ60 transmission/tcase (complete with all shifters/linkage) from 80 to 85.... Complete and together.... $350.00

3FE FJ62 intake manifold and fuel injectors, throttle body, etc. $200.00

3FE Head. No cracks. $150.00

4 speed flywheels $25.00

Can't think of anything else right now... I have alot of crap.

FJ40 and FJ60 rear axle shafts.. $100.00 for the set.

Brand NEW/Never used Optima Yellow Top.... $100

Rear FJ40 door (pre 75 hard top). Perfect condition, absolutely no rust. No glass or hardware. $75.00

Also, I've got a sh!t load of rubber air hoses if you need them. 25 feet and 50 feet. This is the good stuff. Not that cheap vinyl that gets hard when cold.

Prices are for deliver to RoundUp and somewhat negotiable. Cash or check is okay. No paypal.

 

[TxCruzr]

3spd tcase out of '69 - complete w/ parking brake but the front output housing is cracked and needs to be replaced ~$250

SBC - block and crank only - about 6k miles on rebuilt block before being torn down -is bored out but not sure how much ~$250

Stock gray rims (5) off of a '69 FJ-40 ~$100

Super Winch hubs off of mini truck/4runner ~40

Chevy silverado Ext. cab nerf bars (westin brand) - off a '99 but their site shows they will fit from 99-06. ~$150

Will bring this to the RoundUp. I must know by Monday (3/12) so I can get it all loaded.
Send me a PM or email me at TxCruzr@gmail.com

And don't forget, by purchasing such fine equipment, you will be supporting project "Won-Ton" ;p

 

[fj40charles]

Super Winch hubs off of mini truck/4runner ~40

Will bring this to the RoundUp. I must know by Monday (3/12) so I can get it all loaded.

How is the condition of the hubs? Will it work on mini truck birfields?

 

[TxCruzr]

I have mini truck front knuckles on mine so they should fit. They worked when I pulled them off. The edges have a little rock rash but thats it. I can get a pic if you want.

 

[kling-on]

85 fj60 trans and transfer case, drivers door rust on bottom grey door pannel, 1 38155015 bogger,and a xtra pair of Birf for those who need em make best offer



hell I'll even offer up my other doors to any one in austin for yours plus some cash for my strait rust free ones on the 85 before this friday cause they'er get painted then ant I'm sure they get fawked up at round up anyway

 

[Wild at Heart]

Stuff For Sale

Front Grill Guard (Came off of FJ40): $50.00
2 Sets: Rams Horns Manifolds (for Chev. small block engines): $100 Each
Front FJ40 Stock Axle Housing: $50.00
Stock FJ40 Transfer Case (Housing Only): $10.00 ~~~SOLD~~~

See pics of all at http://www.4x4crawl.smugmug.com. Click on Parts/Stuff For Sale

 

[orangefj45]

Front Grill Guard (Came off of FJ40): $50.00
2 Sets: Rams Horns Manifolds (for Chev. small block engines): $100 Each
Front FJ40 Stock Axle Housing: $50.00
Stock FJ40 Transfer Case (Housing Only): $10.00

See pics of all at http://www.4x4crawl.smugmug.com. Click on Parts/Stuff For Sale

got a pic of those ram horn manifolds? any cracks?

 

[orangefj45]

i have a few parts for sale also:

sm465-cruiser 3spd case adapter. in good shape, with t-case $350

minitruck t-case reduction unit with marlin billet cruiser t-case adapter for the 3spd 10 spline t-case. reduction box is used, adapter is brand new $500

th350/th700 to minitruck adapter. AA unit in great shape. $300

PS plate kits for the sag conversion on a 40 or 45 series $70

fj40 cruiser key chains $15

and a bunch of other junk, just ask!

all prices include delivery to katemcy of course!

 

[orangefj45]

85 fj60 parts:

good used ac compressor $100
good used master nad booster $100

.......

 

[Wild at Heart]

got a pic of those ram horn manifolds? any cracks?

I can take better pics of both sets but I am leaving town tomorrow for the rest of the week returning Sunday and then off to Roundup Wednesday.

Both sets are perfect, no cracks. 1 set just came off of Meanie's 400 small block. See pic at www.4x4crawl.smugmug.com. Click on Parts/Stuff for sale.

Russell

 

[JasonH]

good used master nad booster $100
.

I like to buy my nad boosters new. No telling where yours has been.

 

[Wild at Heart]

Rochester Carburetor

Rebuilt Rochester Carburetor: Bought it about 3 years ago for Meanie (that had a Chev. 400 small block in it). Works Great. Sold the small block without all the bolt-on parts.

Will take $200.00 (Paid around $350.00 if I remember correctly). Have the receipt at the office.

Also have starter, ps pump, water pump, alt., chrome breather, etc.....

Russell

 

[orangefj45]

I like to buy my nad boosters new. No telling where yours has been.

would'nt you like to know?!

bawahahahaha, nicely done bud!

 

[valkyrie610]

Halon fire extinguishers.. 10 lb model. Charged and tested. $45.00 each

Brand NEW/Never used Optima Yellow Top.... $100

I'm interested in a fire extinguisher, will you have them with you? How old is the yellow top? How long been sitting? Is it fully discharged?

 

[fj40charles]

I'm interested in a fire extinguisher, will you have them with you? How old is the yellow top? How long been sitting? Is it fully discharged?

I have the fire extinguishers in my shop. The yellow top is brand new and should be fully charged. It has never been connected to anything and has the full warranty. I got the battery in Dec. of last year when my previous yellow top was sent in for warranty.

I will only bring the parts to the RoundUp if you're interested in buying. Don't want to haul anymore parts than I have to.

 

[valkyrie610]

I'd like to get the battery and 2 extinguishers... if you'll take $150 I'm in.

 

[wdwgdas]

FJ80 complete rear locking third member

Includes locking actuator (attached to 3rd member)
Locking worked fine when removed from truck
Pinion bearing is bad was driven 10k with vibrations
Rebuildable.

$400

Eric Holleman
214-675-8081
Will delver to Round Up

 

[frismanis]

What I have:

4 almost new 40" MTRs (one weekend on them) - $1000
2 new Yukon d60 35 spline stub shafts - SOLD
new Poly Performance d60 35 spline drive flanges - SOLD
new Yukon gm d60 5.13 gears - SOLD
new Yukon gm d60 R&P master install kit - SOLD

I know I have some other crap too. I'll update my list as I think of it.

 

[fj40charles]

What I have:

4 almost new 40" MTRs (one weekend on them) - $1000
2 new Yukon d60 35 spline stub shafts - $100 for the pair
new Poly Performance d60 35 spline drive flanges - $150
new Yukon gm d60 5.13 gears - $100
new Yukon gm d60 R&P master install kit - $100

I know I have some other crap too. I'll update my list as I think of it.

Interested in the drive slugs and yukon outers stub shafts.