What year e-brake? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 12, 2007
Threads
10
Messages
44
Location
Tallahassee, FL
The 40 needs an e-brake cable. Want to be sure that it would be for a 77 as I've been led to believe. Is there anything else I'll need for the install, or any pitfalls to point out?

I assume the frame cuts were needed for the 77 drivetrain w 71 frame by the PO.

Thanks:cheers:
ebrake.jpg
 
Well, no, it was not necessary to cut the rear xmember to fit the 2F/4 speed in there. There are some neat tricks to get around that. I run a 2F/4 speed/ Orion in my '66 and didn't cut anything. But what's done is done. Any PB cable that will fit a 4 speed like '74> should work.

GL

Ed
 
there are differences in cables... some enter the cab area through the floor and some through the firewall.....if yours is a '71 it will fall in the group configuration of 7/70-1/75 firewall entrance......
 

Users who are viewing this thread

Back
Top Bottom