Rear bumper cover? (1 Viewer)
- Thread starter boydmick
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Joined
- Aug 17, 2005
- Threads
- 449
- Messages
- 5,649
- Location
- Forest Falls, CA
- Website
- www.adventureduo.com
That means you leave them off now.
I might, i will check tomorrow AM
Sorry, i just checked and it was tossed in the can
Good luck!
Good luck!
- Thread starter
- #6
Thanks for checking.
I managed to salvage mine. A little heat and the plastic popped back into semi-original shape. A little rock rash is all that shows.
At least the plastic is close to the color of the paint. ;p
I managed to salvage mine. A little heat and the plastic popped back into semi-original shape. A little rock rash is all that shows.
At least the plastic is close to the color of the paint. ;p
Slomo
It's Complicated
Boyd, I will be fabbing up a rear bumper pretty soon and if you want my rear bumper corners you are welcome to them. They are painted semi flat black that matches the ARB finish. Little bit of rock rash on the bottom of them both but nothing visible without crouching.
Do you have a definitive plan yet? Are you just going to jump in and play it by ear? I haven't decided between a 4X4 labs do-it-yourself kit and doing it myself.
Sorry for the (slight) hijack
Slomo
It's Complicated
Do you have a definitive plan yet? Are you just going to jump in and play it by ear? I haven't decided between a 4X4 labs do-it-yourself kit and doing it myself.
Sorry for the (slight) hijack
I have not set an exact plan as of yet, I will likely be using ideas from Luke's, Ken's and Christo's bumpers to come up with my own variation. Just can't decide if I wan't to cut the rear crossmember or not. I will do a full write up when I get it under way.