Broken rear hatch lock arm - 3D printing? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Godwin

Resident Herpetologist
SILVER Star
Joined
Dec 4, 2004
Threads
356
Messages
6,836
Location
Alabama
The "control assy, back" is an absolute bargain on Amayama right now at $120. There are two listed.

69790-60020 Control Assy, Back Door Lock [01.1992 - 01.1998] FJ80,FZJ80
69790-60060 Control Assy, Back Door Lock [01.1992 - 01.1998] FJ80,FZJ80 W(REAR 3RD SEAT)

69790-60020 looks like this:
toyota-6979060020-1644200091254-big.jpg


69790-60060 looks like this:
6979060060.jpg
 
IIRC I have the factory one that worked when I removed it...it's yours if you pay the ride

IMG_3020 (1).jpg


IMG_3021 (1).jpg
 
My rear hatch on the 96 LX doesn’t open from the outside (94 LC is good), but does open from the inside. Would this be the solution?
 
My rear hatch on the 96 LX doesn’t open from the outside (94 LC is good), but does open from the inside. Would this be the solution?
You probably have a rod that isn't attached any more to the latch. The part above is the actuater for the lock.
 
You probably have a rod that isn't attached any more to the latch. The part above is the actuater for the lock.
I remember this happened on my parents 1991, and I think we just reattached that arm with some wire and epoxy or something. I’ll probably try that.
 

Users who are viewing this thread

Back
Top Bottom