Stock motor mounts for Vortec Swap? (1 Viewer)

[PanhandleFJ]

I'm moving along in the Vortec swap, got the chassis painted, but didn't remove the old bracket welded to the chassis yet. Do these stay and adapt to the new vortex with the new motor mounts? Or do i cut those off and start with the bare chassis.

 

[White Stripe]

I'm moving along in the Vortec swap, got the chassis painted, but didn't remove the old bracket welded to the chassis yet. Do these stay and adapt to the new vortex with the new motor mounts? Or do i cut those off and start with the bare chassis.

What bracket specifically are you referring too? Have pictures?

 

[tmxmotorsports]

Yes cut the factory frame mounts off and get up with @cruisermatt for the new frame mounts that weld to the chassis and use factory gm truck mounts

 

[PanhandleFJ]

What bracket specifically are you referring too? Have pictures?

This is the driver's side. Do i need to cut this off.

 

[tmxmotorsports]

View attachment 3122776
This is the driver's side. Do i need to cut this off.

Uh yeah that goes

 

[tmxmotorsports]

Ate you sure you know what your doing.? Not being a dick or anything this is something that is well known.

 

[PanhandleFJ]

Ate you sure you know what your doing.? Not being a dick or anything this is something that is well known.

No i don't know what I'm doing. In the sense that I've never done this swap. My thought was that the designers of the various conversion brackets, designed them to adapt to the existing bracket on the frame. I can figure it out I was just trying to save time by asking someone who's already done it.

 

[White Stripe]

No i don't know what I'm doing. In the sense that I've never done this swap. My thought was that the designers of the various conversion brackets, designed them to adapt to the existing bracket on the frame. I can figure it out I was just trying to save time by asking someone who's already done it.

You have to cut off the motor mounts. There are some v8 swap threads here if you search.

 

[BurntToast]

Use cruiserMatt’s mounts (Atleast that’s my plan)

How to LS Swap a FJ60 or FJ62. Quick and dirty guide for regular folks wanting to do an engine swap in their driveway.

This thread looks like a lot, but you can totally do this. I have total faith in you! I've been meaning to do this for a while now. I havent really seen any how to guides or anything online and this one isnt going to be absurdly thorough or anything but will get you onto the right track. If i...

forum.ih8mud.com

And read that one

 

[PanhandleFJ]

Use cruiserMatt’s mounts (Atleast that’s my plan)

How to LS Swap a FJ60 or FJ62. Quick and dirty guide for regular folks wanting to do an engine swap in their driveway.

This thread looks like a lot, but you can totally do this. I have total faith in you! I've been meaning to do this for a while now. I havent really seen any how to guides or anything online and this one isnt going to be absurdly thorough or anything but will get you onto the right track. If i...

forum.ih8mud.com

And read that one

I don't think they would take them back, bought about a year ago. If it's just the hassle of installing i can deal with that. If it's inferior after install that I wouldn't like. The old brackets are off. I'm really impressed with the POR 15. I had to grind some when grinding the old welds, plus sparks hitting the new paint. Didn't phase it.

 

[cruisermatt]

As we discussed over PM, buy my mounts, wire harness, shifter adapters, sensor adapters, TCC wiring, and a Gen 3/4l60 swap into a FJ62 will be almost as easy as it can possibly be.