I've been neglecting my 80 because I've got other projects and now it wont start. When I turn the car on I don't have a CEL or codes. I replaced the pump but I still didn't hear the pump start up when I turned the car on. I've been able to spray starter fluid into the throttle body and get the engine to fire up. I tried jumping the fuel pump relay at the #3 connector to +12v from the battery but still didn't hear the pump kick on. There is 12v at the B+ terminal on the diagnostic port. There is also 12v at the brass screw on the fusebox where the EFI relay is. The vehicle also has fresh gas in it.
I normally don't throw parts at a problem but I did in this case.
New Parts:
Fuel Pump
Fuel Pump Relay
EFI Relay
Open Circuit Relay
Fusible Links
Anyone have any ideas on what I should be looking for?
I normally don't throw parts at a problem but I did in this case.
New Parts:
Fuel Pump
Fuel Pump Relay
EFI Relay
Open Circuit Relay
Fusible Links
Anyone have any ideas on what I should be looking for?