looking good! hopefully i get mine today.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
looking good! hopefully i get mine today.
your Bullbar ?looking good! hopefully i get mine today.
yes, ordered the same one from cruiser outfitters.your Bullbar ?
do you think it's because the ARB was used? or were your fenders just uneven?I got mine last week after a long search for a used one. But have run into a slight snag with the way my fender was lining up so now I have opened a new can of worms haha.
No gap on the Driver's side:
View attachment 3050765
After adjusting the front gap on the fender:
View attachment 3050764
And now what I have going on. Turns out the fenders dont rub if you dont have one.
View attachment 3050766
It’s for sure the fender, it was rubbing on the door at one point. I caved and bought a new ARB. Turns out they are hard to find used in the states.do you think it's because the ARB was used? or were your fenders just uneven?
I got mine last week after a long search for a used one. But have run into a slight snag with the way my fender was lining up so now I have opened a new can of worms haha.
No gap on the Driver's side:
View attachment 3050765
After adjusting the front gap on the fender:
View attachment 3050764
And now what I have going on. Turns out the fenders dont rub if you dont have one.
View attachment 3050766
just installed. do you know if the turn signals are 24v?your Bullbar ?
Bj73. I’m beginning to think it’s not square. The upper fender where the land cruiser badge is doesn’t have the same gap between the edge and windshield frame on the drivers side as it does on the passenger as well. Lots of little body gap problems it looks like.Wjat model truck do you have ? I have never had an issue with them , is yourtruck square ?
just installed. do you know if the turn signals are 24v?
They ship with 12V bulbs you need to swap to multi volt LED or buy 24V from amazon or any truck placejust installed. do you know if the turn signals are 24v? View attachment 3050967View attachment 3050968
I got mine last week after a long search for a used one. But have run into a slight snag with the way my fender was lining up so now I have opened a new can of worms haha.
No gap on the Driver's side:
View attachment 3050765
After adjusting the front gap on the fender:
View attachment 3050764
And now what I have going on. Turns out the fenders dont rub if you dont have one.
View attachment 3050766
Do you have Hobby Lobby’s in Texas?Not sure where to post this but I am wondering if anyone has any suggestions for suction cups (the kind you can pull with rings attached) for my solar shades. My solar shades work great in the Texas heat but the suction cups it came with are horrible. Too small in diameter to get strong holding power.
View attachment 3053604
Do you have Hobby Lobby’s in Texas?