Rear spring recommendation (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 14, 2012
Threads
91
Messages
901
Location
Vacaville, CA
Good morning, a bit of a tall order here. I’m looking for a heavier spring then my current setup. I currently have the Icon 3” kit but I used 30mm spacers to level out the rear since I yielded a bit more then 3” up front. I also have Airlift airbags out back specifically for towing.

I’ve already felt the rear springs were a little soft to begin with. Although it may not be ideal, what is the heaviest rear spring in 4” of lift on the market.

F254307C-024F-4FBC-A0CF-FE76C858549F.jpeg
 
Why upgrade springs with airbags?

The airbag does that for you.

Cheers
Yes, I wanted to run a hydro bump-stop in the rear as well. Delta make some that are inside the coil, like their front versions.

I’ve seen some mounts on forerunners that mount to the outside of the frame…not sure if there are any other turn key parts without having to weld.
 
Last edited:
I run a Dobinsons 319 coil in the back. It is the highest spring rate I could find for an 80, with enough height to give a 4”+ lift. I
 
Last edited:
I think I’ll give the Slees a chance. Who knows, maybe you’ll see them in the classifieds in a month or so.
 

Users who are viewing this thread

Back
Top Bottom