Broken Down Canada: Master Brake Cylinder (1 Viewer)

[alwaysbrokedown2]

A seal on my Master Brake Cylinder on this headache of an HDJ81 I am driving to Alaska. The 2nd Gen 4runner MC fits, I believe.

Any friends in Canada that have an extra that they could part with? Tricky finding it on the holiday weekend. I would rather have a full component rather than a rebuild kit...I already had replaced the seals from another cruiser and those only got me this far from Washington....

Please help it will be greatly appreciated!

-Kai

 

[pappy]

Double check that. As I recall the 80-series master cylinder has the front port point up. On the Gen2 4R the front port points to the fender. Yes it bolts up, but the hardline won't.

Plus, is your 80 rear disk brake? If so, the 4R master is set up for rear drum. They are different.

 

[alwaysbrokedown2]

Double check that. As I recall the 80-series master cylinder has the front port point up. On the Gen2 4R the front port points to the fender. Yes it bolts up, but the hardline won't.

Plus, is your 80 rear disk brake? If so, the 4R master is set up for rear drum. They are different.

Pappy that's good info! thanks. Found a cruiser one up here.

Cheers