Bought this from napa and it wont go all the way in the four holes. I can see the threat coming out from the cabin but will not go all the way. Any idea what’s stopping it? Napa ones does not fit good perhaps?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Did the exact job 10 days ago, NAPA booster too.Bought this from napa and it wont go all the way in the four holes. I can see the threat coming out from the cabin but will not go all the way. Any idea what’s stopping it? Napa ones does not fit good perhaps?
View attachment 3011419
Did u have to line up the brake bracket from inside the cabin? Damn this one is tough. That rubber grommet is all ripped apart already.Did the exact job 10 days ago, NAPA booster too.
I used a pry bar to give it a friendly nudge.
But, it's tight, that's fer sure.
Bolts are lined up. All 4. Its being held up somewhere. The center bore maybe? I cant see anything holding it up.Stick a bolt or something in from the inside to line it all up and push that out with the booster bolts. Or put a little pressure on the booster then go inside and move the peddel bracket to release the tension.
Hard to take photos from the cabin but i do sew the bolts peeking through. I also notice the clevis bore seem to have more space on the top and really close to the bottom. Could that be catching? We tried the spin the booster upside down and it went in more but still not all the way.can you grab it from the inside and move it around while pulling? make sure the clevis isn't caught on your peddle. Also are you able to post some pictures so we can see what you are working with? picture from the side on the outside and some on the inside showing the bolts coming in straight on and from the side.
Hard to take photos from the cabin but i do sew the bolts peeking through. I also notice the clevis bore seem to have more space on the top and really close to the bottom. Could that be catching? We tried the spin the booster upside down and it went in more but still not all the way.