Need some help from all the 3FE experts. Last weekend I swapped in a new to me 3FE from a 1988 FJ62 into my 1989. Swapped over the wiring harness. Everything went well until time to start the engine. It’s cranks over very well but will not start. It was not getting any fuel or spark.
So far I have checked all grounds and fuses. Fusible links seems to checkout good. EFI relay didn’t seem to checkout so I jumped it and now I have 12v to the B+ on the diagnostic port. I also now have fuel but no spark. The other thing is that the check engine light does not illuminate when I turn the key.
Any idea what this could be or what else to check?
So far I have checked all grounds and fuses. Fusible links seems to checkout good. EFI relay didn’t seem to checkout so I jumped it and now I have 12v to the B+ on the diagnostic port. I also now have fuel but no spark. The other thing is that the check engine light does not illuminate when I turn the key.
Any idea what this could be or what else to check?