Non-us distributor install issue (1 Viewer)

[ToyotaMatt]

This is a 1984 3F. AU Spec . FSM

This is indeed the 61180 dizzy w/o octane selector option

I will post the entire dizzy section for everyone to expand there minds and tech on this topic

When I first encountered the 3mm gap I freeked out this unique 3F non USA FSM guided me to home base and eased my mind after all it was a clients shop job back then and not my own land cruiser so mission critical everything had to be everything

Focus on 2nd to last page the dizzy install procedure FSM steps

Interesting to say the least

 

[ToyotaMatt]

 

[FJ40Jim]

The dissys with a drive pin BELOW the gear, seat the gear on the top of the oil pump. They do not register on the block.

If drive pin is above the gear, dissy seats on top face of engine block. Gear floats above oil pump.

 

[Webster]

The dissys with a drive pin BELOW the gear, seat the gear on the top of the oil pump. They do not register on the block.

If drive pin is above the gear, dissy seats on top face of engine block. Gear floats above oil pump.
View attachment 2621400

 

[Webster]

Interesting, so the gear actually rubs on the pump when spinning?