- Joined
- Jun 28, 2019
- Threads
- 34
- Messages
- 424
- Location
- Highlands Ranch, CO
- Website
- coachglenndavis.com
I leave from Denver to the AL coast in a few days and it will be helpful to have these two issues resolved for safety reasons. At least the lights on the tail gate and the third brake light are working normally.
While I was testing my custom-made bar to hold a brake/tail/turn lights that will go on our bike rack, I noticed issues with the tail lights.
1) Not all of the "lights" on the right tail light are illuminating. I examined the wires and housings, and looked to see if the wires were snug. I even ran an extra ground wire to the body but this didn't help. The light flickers as well. I posted this issue a few days ago but now I'm wondering if the assembly needs to be replaced. If so, any ideas for inexpensive options?
2) The left tail light works as normal but the side marker light isn't illuminating. Is this also an indication the assembly needs to be replaced?
While I was testing my custom-made bar to hold a brake/tail/turn lights that will go on our bike rack, I noticed issues with the tail lights.
1) Not all of the "lights" on the right tail light are illuminating. I examined the wires and housings, and looked to see if the wires were snug. I even ran an extra ground wire to the body but this didn't help. The light flickers as well. I posted this issue a few days ago but now I'm wondering if the assembly needs to be replaced. If so, any ideas for inexpensive options?
2) The left tail light works as normal but the side marker light isn't illuminating. Is this also an indication the assembly needs to be replaced?
Last edited: