Hey all,
I know this has been covered to death, and I've spent hours searching and reading, but maybe someone can confirm these parts will work before I plunk down the credit card.
I have a '73 FJ40 with a Wilwood (I know) disc brake kit on the front.
My rear drums need work, and I'm not gonna throw good money after bad, so I'm swapping to rear discs. Also, my Master cylinder seems to be acting weird, so I'm going to replace that now too.
This is what *I think* I know..
Stock FJ80 non-ABS master cylinder. Supposed to bolt up to my stock brake booster?
Probably a good idea to add a proportioning valve
I think I'd like a kit based on GM rear calipers, maybe GM rotors? Any other rear disc kit suggestions?
JTO sells what looks like a complete kit, but I know, JTO..
Also it looks like Poser might sell some of the components, I'll shoot him a PM. Any other suggestions?
Looks like Ill need to get a decent double flare tool to do my tubing. Rigid tool for 3/16 line?
Amazon product ASIN B000X4K9KO
3/16th line and 10mm x1.0 flare nuts?
So how's my list look?
I know all this info is out there for the searching but just needed put it down in one place and get some confirmation.
Thanks All !!!
I know this has been covered to death, and I've spent hours searching and reading, but maybe someone can confirm these parts will work before I plunk down the credit card.
I have a '73 FJ40 with a Wilwood (I know) disc brake kit on the front.
My rear drums need work, and I'm not gonna throw good money after bad, so I'm swapping to rear discs. Also, my Master cylinder seems to be acting weird, so I'm going to replace that now too.
This is what *I think* I know..
Stock FJ80 non-ABS master cylinder. Supposed to bolt up to my stock brake booster?
OEM Brake Master Cylinder for '93 to '94 Land Cruiser FZJ80 Without ABS
Brake master cylinder for 8/'92 to 5/'94 Toyota Land Cruiser FZJ80 without ABS. 1" big bore. Also suitable for FJ40 front disc brake conversion with rear drum brakes. OEM part number: 47201-60540 Made in Japan by OE manufacturer ADVICS (previously branded under AISIN).
www.cityracerllc.com
Probably a good idea to add a proportioning valve
FJ40 Proportion Valve Adjustable for use with Manafre Rear Disc Brake Conversion Kit Wilwood 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 - Landcruiser Parts
Wilwood Adjustable Proportion Valve for use with Manafre Rear Disc Brake Conversion kits (Early – 7/1980). Installing this part in […]
manafrelv.com
I think I'd like a kit based on GM rear calipers, maybe GM rotors? Any other rear disc kit suggestions?
FJ40 FJ55 Disc Brake Conversion Kit Rear Semi Floater 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980 - BTB Products - Land Cruiser Restoration and Parts
If you are planning on changing over to rear disc brakes on your E-7/80 Land Cruiser, we have the ultimate kit for you using the highest quality components: Laser cut Mounting brackets, DBA /slotted/anodized/ventilated rotors, MAF D.O.T. steel braided brake lines, Grade 8 mounting hardware...
btbprod.com
JTO sells what looks like a complete kit, but I know, JTO..
Rear Disc Brake Kit for Toyota Land Cruiser FJ40 FJ45 FJ55 e-80 SF – JT Outfitters
www.jtoutfitters.com
Also it looks like Poser might sell some of the components, I'll shoot him a PM. Any other suggestions?
Looks like Ill need to get a decent double flare tool to do my tubing. Rigid tool for 3/16 line?
Amazon product ASIN B000X4K9KO
3/16th line and 10mm x1.0 flare nuts?
So how's my list look?
I know all this info is out there for the searching but just needed put it down in one place and get some confirmation.
Thanks All !!!