Hate to resurrect an old thread but which one is the shortest filter? I was reading the 90915-yzzj4 is a lot shorter than the previous model? Can someone confirm this
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yes.
Onur,
I spotted some specs that say it is a 102mm in height (4” +\-). Do you know of anything shorter? I have a Wix filter 51515xp and online it says 5.6 inch height (I measured 4.5 so I’m assuming that the 5.6 height online is the box dimensions).
is the 4” height for the yzzj4 the filter height or is it the box height? Need to minimize filter size as it in interfering with my turbo manifold
do you have the 13BT manifold and the upward facing filter mount? I don’t know dimensions but the wix 51085 works with this combo
You are @cruiserdan new hero utilizing a Mopar part on a Land Cruiser
@Onur
Do you know difference between 15601-44011 and 15600-41010?
Looks to be quite similar size, maybe a little shorter?
Builds - 1985 JDM 3B Engine Rebuild and Other Stories
Next up: oil line feed and return lines for the block. The strainer sucks in the oil from the sump and feeds to the oil pump at the front of the engine in the oil pump case housing. It then goes through the system with a number of relief valves and by-pass feed location. Then returns through...forum.ih8mud.com