It was meant mostly as a "make sure and push all the buttons and use it" comment but point taken about full time 4wd.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I'll give that a try and check back inIt might have to do with your cabin air filter. If you don't set the system to Recirculate before opening and changing the cabin filter, it does this. Turn the car on, set the AC to recirculate, turn the car off, then open the door in the back of the glove box, remove, inspect and replace the filter.
If the light is no longer flashing I recommend engaging 4WD and the CDL, driving a few feet, then disengaging it. That ensures the transfer case actuator actually moves correctly.I have the same issue with my 2015 LC 200, the CDL light flashing every time I started the engine. I fixed it by simply turning engine ON and put transmission on neutral, then turn engine Off then ON the flashlight will stop
Last week I put her in 4l (as a monthly thing) and it wouldn’t come back out until I shut it down and restarted. Then today on the First real cold morning, the center diff light started flashing when I started it and I was unable to shift from 4h to 4l. Drove for a while, turned the truck off, then back on and everything worked normal. Truck has 101,000k and hope this isn’t the start of a s***ty winter.
Last week I put her in 4l (as a monthly thing) and it wouldn’t come back out until I shut it down and restarted. Then today on the First real cold morning, the center diff light started flashing when I started it and I was unable to shift from 4h to 4l. Drove for a while, turned the truck off, then back on and everything worked normal. Truck has 101,000k and hope this isn’t the start of a s***ty winter.