Builds Frog's FJ159 (1 Viewer)

[Jdc1]

Inside and most of the firewall done
View attachment 1999694View attachment 1999695

Rourke Supply is a great source for the flapdiscs. Buying the $13 Home Depot specials gets old real quickly.

 

[afraptor22]

Get the Benchmark Abrasives discs from Amazon or direct. They work well and cost $2 per disc.

 

[A10Driver]

Get the Benchmark Abrasives discs from Amazon or direct. They work well and cost $2 per disc.

Funny you mentioned that, I just bought some 5 minutes before you posted this

 

[A10Driver]

Redneck dent puller, will let you know in a bit if it works

 

[A10Driver]

It works, the slider good use more mass

 

[pjohnson]

I kinda liked the look of the spot welds on the floor. Sorta industrial.

 

[A10Driver]

I kinda liked the look of the spot welds on the floor. Sorta industrial.

I did too, but they were not even. I plan on using lizard skin and wanted it smooth

 

[A10Driver]

Starting to turn into one color. Dropped the body off today to get blasted and epoxy

 

[bigredmachine]

After sanding, one more layer of mat, then woven

what weight glass were you using on the roof panel

 

[A10Driver]

what weight glass were you using on the roof panel

Home Depot 3m fiberglass mat on the topside, the bottom side has the mat, then one more layer of woven to smooth it out. Not sure on the exact weight, but it is really heavy now, probably too heavy

 

[A10Driver]

Back doors getting welded up. I need to order bottom skins for 3 doors, ccot ok?

 

[A10Driver]

Bezel turned out nice

 

[Pacer]

Back doors getting welded up. I need to order bottom skins for 3 doors, ccot ok?
View attachment 2007720View attachment 2007721View attachment 2007722

Yes, I've heard good things about Cool Cruisers steel. Is that what you're asking?

 

[A10Driver]

Yes, I've heard good things about Cool Cruisers steel. Is that what you're asking?

Yup, thanks

 

[A10Driver]

Some shop wall art.

 

[swilson]

Very cool. Hard to get an idea of their size. How big are they? Where can I get one?

 

[A10Driver]

Very cool. Hard to get an idea of their size. How big are they? Where can I get one?

I will measure, but pretty big. I have a buddy that makes signs. Let me know if you want his contact info

 

[swilson]

Yup, my garage needs those!

 

[A10Driver]

Yup, my garage needs those!

 

[A10Driver]

Yup, my garage needs those!

My buddy's name is Zack, phone number is 360-929-9701 . Prices are from 200 all the way up to 800 depending on size. They look awesome