Made 1" thick aluminum pucks at work. I have machine shop access. Ordered bolts and material from McMaster-Carr. Any machine shop can make them for you. If you can't find one let me know, where you located?
Best info here:
How's your 100 Series Body Lift?
I know there are at least a couple of MUDders that have installed body lifts. Maybe more. It seems like when you get into the "true" 35" tires, like the Toyo OC MT (taller and wider than most), the best way to reduce rubbing might be via body lift. What size lift are you running...forum.ih8mud.com
I had some lift access yesterday and did a 1/2 body lift. I made pucks out of 1/2 starboard hdpe. I replaced the 6” front 4 bolts with 7” and a few exra washers. We slotted 4 of the pucks, where we didn’t want to dig for the access to the top. Also we used side or downward leverage to keep the bolt down against the lock tabs.Where'd you source the body lift? I'm on the fence with the idea of adding 1/2-1", and I kind of want to see what all is involved for the 100 series specifically. TIA