80 Series General Tech and Classifieds (5 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Sucks about the trans. Too much power?

A mixture of a few issues but the replacement trans is being built with alto reds and all heavy duty internals and a 2800 stall converter. Also getting a proper tune$$$, currently on stock fuel tables. Should be able to pick up more ponies/reliably. New trans should be good for 700hp.
 
View attachment 1862628 View attachment 1862629
This is a sneak peak of what I’m putting into mine. It is not bolt in but should yield excellent results. I’m ditching the radio completely and will run the entire system off of my phone via iSimple lightning to rca adaptor or via Bluetooth directly to the Kappa K4 amplifier 4 channel amp. In the front doors are Kappa Perfect 5.25 woofer/ tweeter and Kappa Perfect 300m 3.5” in dash location. This will be ran as a 3-way set up and should be extremely accurate off the front 2 channels of the K4. The rear 2 channels will power the Kappa 6x9’s in the rear doors. These may turn out to be too much so may be just temporary. Master volume will be controlled by the AudioControl LC8i. An Infinity Kappa K1000 powers the 3 JL Audio 12w3v2’s. The subwoofer install is temporary and a false floor/drawer system will house them in the future. The amps will end up behind the passenger rear interior panel. Not pictured is 120sq/ft of Noico that will be installed on all interior surfaces. A new carpet kit (thanks again @dnp) and a faux suade headliner will round off the interior. Would already be almost done with the install but the 4L80 trans in the truck took a crap and it is currently not driveable.
@AndyO78FJ40 my audio is very basic and rookie install compared to @offr0adlim0 setup !
 
I just put a set of Polk db651s in the doors front and rear. Course my 91 doesnt have many speakers, actually it didnt even have any in the front doors, I had to cut the holes for those myself.
 
1996 Toyota Land Cruiser All original

A buddy is going to look at this one anyone know about it?

I saw it while working up there. Its not locked, paint has some fading etc in all the usual places. Inside looks decent but only saw it in passing. The guy that owns that lot drives it often I think. He’s had it awhile id low ball cash offer him and see if he bites.
 
I saw it while working up there. Its not locked, paint has some fading etc in all the usual places. Inside looks decent but only saw it in passing. The guy that owns that lot drives it often I think. He’s had it awhile id low ball cash offer him and see if he bites.

Thanks
My buddy ended up giving him $6,100 forbit. I think it’s fair for those these days. $5k would have been a deal
 
The Wits end Quarter panel mount I ordered several months ago just arrived yesterday. I decided not to install it since I am trying to sell my 80. At this time Joey is not planning on making another run of the 80 series Quarter panel mounts.

Extremely well made and allows you to screw any accessories to the wood panel and have it hidden behind the plastic interior panels

$265 (that’s what they sold for before shipping, which was $50)

Mine is brand new in the box
View attachment 1758321
View attachment 1758322
View attachment 1758323

Any chance this is still available?
 
Kicker KS600 door speakers. Removed from my 80 and replaced with something stupid. These are a 6” speaker and fit just fine in my front doors. Includes only one grill the other one is somewhere on 4Fingers. $35 for the pair.
1902595
1902596
 
Discovered a good solution to a wallowed out j-hook hole on the battery box.

18014135-09D7-4877-B718-2EC06E603679.jpeg
3BDAA00C-6EDB-4F5B-8839-7516553D9BC5.jpeg
BF597EED-A2C2-432A-BEF4-918EFB097C4B.jpeg
448911DA-7C77-4C5B-9DC3-4A1B6CE7044F.jpeg
1074DAF5-FC16-4DDF-B82B-1275D9A91DC4.jpeg
 
Last edited:
B41136E6-B302-474B-9432-3D0EA6FCA694.jpeg
40543702-46F7-41FB-95DD-2BA6BF3F7AD5.jpeg
2AAFE586-C966-48AA-920C-0D3308FF0F79.jpeg
 
Nice.

Sidebar, anybody have a tailgate with the license plate light assembly intact? I need the light assembly. Thanks.
 
Nice.

Sidebar, anybody have a tailgate with the license plate light assembly intact? I need the light assembly. Thanks.


I would have sent this direct on FB but I have a rule not to post directly to double name Facebook pages 👊

1914041
 
There’s an 80 at Pull a Part in Memphis. ‘94 I think.
 
Anyone got a local 1FZ 80 they are parting out?
 
OrangeBoxx rear molle panel set up with two baskets. Decided not to install. $230 shipped. Located in Brandon, MS

499A9F5A-FE04-4F0C-B74C-39A58E284252.jpeg
 
If anybody has any need for any of this stuff let me know.

06818499-AE23-4321-8F61-6FC6EDF10769.jpeg
 

Users who are viewing this thread

Back
Top Bottom