Trail Tailor Offerings- Racks, Sliders, Control Arms and Misc (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

@custyota @larryt @KraziAzn @bwell @Kmonty66 @bozncsurf @jrmudder92 @krice118 @mrahc @Newps @Scrambled @TXSunDevil @ikarus @hoser @MTKID Sorry if I missed someone.

Got the Creeper Skid tacked up today.

Pricing will be 465.00 powdercoated OR 435.00 bare metal SHIPPED to the lower 48. 18.00 handling, packaging and insurance fee added at checkout. Box is 48 x 36 x 6.

3" x 2" x .250" tube crossmember, .250" Grade 50 frame plates and skid plates. These will all be CNC milled and cut. This replaces the factory crossmember. Protects the transfer case and the transmission pan. Holes are cut for draining fluids easily and still access the TC fill hole without dropping a plate.

Factory skid 18.4#
Creeper 44.2# actual product (shipping weight 51#)

Who's in on these? I'm order materials tomorrow and get going if I can get 5 orders.

Jason

IMG_20190123_112459818.jpg
IMG_20190123_112518775.jpg
IMG_20190123_112649439.jpg
IMG_20190123_112945726.jpg
IMG_20190123_112958317.jpg
 
Last edited:
@custyota @larryt @KraziAzn @bwell @Kmonty66 @bozncsurf @jrmudder92 @krice118 @mrahc @Newps @Scrambled @TXSunDevil @ikarus @hoser @MTKID Sorry if I missed someone.

Got the Creeper Skid tacked up today.

Pricing will be 465.00 powdercoated SHIPPED to the lower 48.

3" x 2" x .250" tube crossmember, .250" Grade 50 frame plates and skid plates. These will all be CNC milled and cut. This replaces the factory crossmember. Protects the transfer case and the transmission pan. Holes are cut for draining fluids easily and still access the TC fill hole without dropping a plate.

Factory skid 18.4#
Creeper 44.2# actual product (shipping weight 51#)

Who's in on these? I'm order materials tomorrow and get going if I can get 5 orders.

Jason

View attachment 1887072 View attachment 1887073 View attachment 1887074 View attachment 1887075 View attachment 1887076

Questions.

Is bare steel available? If so how much? I'm assuming this is a direct bolt-on? Thanks
 
Hey Jason, any chance you're still considering the discount you mentioned, and if we need to get on a list? Really wouldn't mind seeing it for a 2" kit, but I'll certainly take whatever I can get.

Yes on the 2.5" TourFlex - 200.00 discount. The 2" Tough Dog kit I can't offer that, but will offer free shipping to MUD members. PM me for kit specifics.

J
 
I’m out. I absolutely love the design but I want to do a “tummy tuck” smooth bottom if I can after the final height of body lift is determined.

Looks great though!
 
@custyota @larryt @KraziAzn @bwell @Kmonty66 @bozncsurf @jrmudder92 @krice118 @mrahc @Newps @Scrambled @TXSunDevil @ikarus @hoser @MTKID Sorry if I missed someone.

Got the Creeper Skid tacked up today.

Pricing will be 465.00 powdercoated OR 435.00 bare metal SHIPPED to the lower 48.

3" x 2" x .250" tube crossmember, .250" Grade 50 frame plates and skid plates. These will all be CNC milled and cut. This replaces the factory crossmember. Protects the transfer case and the transmission pan. Holes are cut for draining fluids easily and still access the TC fill hole without dropping a plate.

Factory skid 18.4#
Creeper 44.2# actual product (shipping weight 51#)

Who's in on these? I'm order materials tomorrow and get going if I can get 5 orders.

Jason

View attachment 1887072 View attachment 1887073 View attachment 1887074 View attachment 1887075 View attachment 1887076
I'm going to have to pass for now cause I'm eyeing the UCA's and have a couple 62 issues that need attention first. On my long list of wants...
 
I'm going to have to pass for now cause I'm eyeing the UCA's and have a couple 62 issues that need attention first. On my long list of wants...

I need your 62 for half a day ;) I have the early and late 60s, just need a 62 for the same design.

J
 
I need your 62 for half a day ;) I have the early and late 60s, just need a 62 for the same design.

J
Name the date and I'll come up....when your not busy HA!
 
I'm about to start another run of the 100 series UCAs. They are 619.95 a pair shipped.

Jason

How do I get added to this run? Or do we wait until it's listed on the website?

Should have picked them up in Nov when I ordered the TD kit and when they were slightly cheaper :doh: :hillbilly:
 
@custyota @larryt @KraziAzn @bwell @Kmonty66 @bozncsurf @jrmudder92 @krice118 @mrahc @Newps @Scrambled @TXSunDevil @ikarus @hoser @MTKID Sorry if I missed someone.

Got the Creeper Skid tacked up today.

Pricing will be 465.00 powdercoated OR 435.00 bare metal SHIPPED to the lower 48.

3" x 2" x .250" tube crossmember, .250" Grade 50 frame plates and skid plates. These will all be CNC milled and cut. This replaces the factory crossmember. Protects the transfer case and the transmission pan. Holes are cut for draining fluids easily and still access the TC fill hole without dropping a plate.

I’m interested in this. Powder coated.

Do you have enough interest to do a run of these?
 
@custyota @larryt @KraziAzn @bwell @Kmonty66 @bozncsurf @jrmudder92 @krice118 @mrahc @Newps @Scrambled @TXSunDevil @ikarus @hoser @MTKID Sorry if I missed someone.



Got the Creeper Skid tacked up today.

Pricing will be 465.00 powdercoated OR 435.00 bare metal SHIPPED to the lower 48. 18.00 handling, packaging and insurance fee added at checkout. Box is 48 x 36 x 6.

3" x 2" x .250" tube crossmember, .250" Grade 50 frame plates and skid plates. These will all be CNC milled and cut. This replaces the factory crossmember. Protects the transfer case and the transmission pan. Holes are cut for draining fluids easily and still access the TC fill hole without dropping a plate.

Factory skid 18.4#
Creeper 44.2# actual product (shipping weight 51#)

Who's in on these? I'm order materials tomorrow and get going if I can get 5 orders.

Jason

View attachment 1887072 View attachment 1887073 View attachment 1887074 View attachment 1887075 View attachment 1887076

Pardon my ignorance, but got a few questions about this creeper. What’s the advantage of this over a standard steel skid plate? Weight? Does it affect the clearance? I’ve been thinking about something to protect the trans and tc, this looks very interesting.
 
Pardon my ignorance, but got a few questions about this creeper. What’s the advantage of this over a standard steel skid plate? Weight? Does it affect the clearance? I’ve been thinking about something to protect the trans and tc, this looks very interesting.

Most other companies require two skids to protect the trans pan and the transfer case. Mine protects both with one skid and the strength of the skid is focused on the pan and TC with one unit. IMO, no need to protect "voids" and at the same time allows for easy filling and draining without removing plates.

1/4" grade 50 steel plate vs most others with 3/16" A36 plate and protects what needs to be protected for 1/2 the price in most cases.

J
 

Users who are viewing this thread

Back
Top Bottom