Stated & reality on specs are rarely the same.
Yup! However the spec is pretty dang close to reality on these king’s shocks. Given the error of margin of me meauring using a cheap tape measure it’s probably spot on!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Stated & reality on specs are rarely the same.
STOCK & STOCK HEIGHT REPLACEMENT COILS
A few years back I saw a thread that had all the different OEM coils specs with the color dots etc... I can no longer find it. If anyone has found it or has the link to it I would like to add this info on this thread. I believe @Tools R Us made a couple entries in that thread.
I know the OME stock height replacment coils are the 2861/2862
@reevesci what does Tough Dog have to offer in stock replacement?
@David Otero does Dobinson have a non lift replacement coil?
@helocat Does TJM have a non lift stock replacement?
Does any other manufacture make non lift replacement coil since factory OEM coils are close to no longer available?
Last question, is there some kind of year where there taller ones come from or part numbers?Yes sir, all the ones the 3rd gen 4Runner guys like to pilfer off our trucks for the back of theirs.
Last question, is there some kind of year where there taller ones come from or part numbers?
x2Also anybody got a pic of 50mm Slinkys? Preferably on 35s. Considering going down from the 75mm.
I've never seen a part number for these and no clue on which 80s sat up higher than others. Maybe one of the old heads here can shed some light on those details!
This is all I've seen regarding the 50mm Intermediate coils. This is "copy/paste" from the 4xOverlandUSA site. No actual specs but better than nothing. I'll see if I can get some free height measurements. I know EHO is in between shipments at the moment so might have to wait until the next batch arrives.x2
50mm is still a mystery, well all the specs are.
All the part numbers have changed, the fronts were 5300, that's all I know.
@AutoCraft Aus or @dockbox this is a good opportunity to promote your products.
Does anyone have pictures of these coils?
Please post.
Please show wraps & color code.
OEM coils still available
FL (48131-6A480) 18.75" green/ orange/ white 7.75 wraps supersedes 6A470 & 6A490
FR (48131-6A570) 18.5" 2purple/ grey/ white 7.5 wraps supersedes 6A450 & 6A460
Is it official that rear OEM coils are no longer available?
Thanks
I came across this today. Enjoy.
Review: Delta VS Panhard Lift Bracket
FJ80 Delta Panhard Lift Bracket
250.00
FJ80 Delta Radius Arm Set
1,300.00
FJ80 Hydraulic Bumpstop Mounts w/ 1" Spacer
SuperPro Lift Correction Arms for Toyota Landcruiser - SuperPro
80 Series 2- 6 dropped Radius Arms for Landcruiser FJ80 FZJ80 [SUPR_DropRadius3] - $1,499.50 : Extreme Landcruiser, Upgrades for Extreme Offroad Performance
STOCK & STOCK HEIGHT REPLACEMENT COILS
A few years back I saw a thread that had all the different OEM coils specs with the color dots etc... I can no longer find it. If anyone has found it or has the link to it I would like to add this info on this thread. I believe @Tools R Us made a couple entries in that thread.
I know the OME stock height replacment coils are the 2861/2862
@reevesci what does Tough Dog have to offer in stock replacement?
@David Otero does Dobinson have a non lift replacement coil?
@helocat Does TJM have a non lift stock replacement?
Does any other manufacture make non lift replacement coil since factory OEM coils are close to no longer available?