would this fit a 2014 200? the tjm summit has part number TJM-070SB13R82A says it will only fit years 2008-2011. 
TJM T13 Bull bar installed - Lots of pics (1 Viewer)
- Thread starter Archtaan
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Call summit. TJM has / had (?) a rep in the San Diego area that was knowledgable about the products. I spoke with the rep when I sourced mine. I'd ask summit for the reps # and see if he knows, that is if summit cannot answer your question.
Good luck
Good luck
I've got the T3 bar on my '13. As far as I'm aware it should fit even on the 16's. There shouldn't be any changes to the chassis across the years only issue you might face is the radar in the grill might get blockedwould this fit a 2014 200? the tjm summit has part number TJM-070SB13R82A says it will only fit years 2008-2011.
Is the T3 currently available or did you source this sometime ago?
Not sure on availability picked mine up in May 2013
Estimated ship date December 28, 2015 here in the US
Wow thanks guys
Thanks for the write up and all the great responses. I am trying to make the call between this and the Bump-It Offroad with hoops. Hard call.
Got mine installed and here is what I have to add. 90% can be done alone, it’s very helpful to have a 2nd hand help lift and hold it in place while one person is tightening the bolts. It took me two full days 9a-5p to install, but I did a lot of extra wiring to my fuse/relay panel. I still need to mount my 9” fogs.
I would read through the directions a couple times before you start. Organize all the nuts and bolts by size and maybe label the piles of bolts by length. It will be very helpful to have the following tools:
For measuring bolt lengths - 6 in. Digital Caliper
For drilling parking sensor hole - Titanium Coated High Speed Steel Step Bit Set 2 Pc
I put on some Trail Tailer recovery points but I don't think the holes will be accessible because of clearance issue with the TJM winch frame. I'll probably have to build a spacer with some 1/4" or 1/2" aluminum so they sit lower and get some longer bolts.
I would read through the directions a couple times before you start. Organize all the nuts and bolts by size and maybe label the piles of bolts by length. It will be very helpful to have the following tools:
For measuring bolt lengths - 6 in. Digital Caliper
For drilling parking sensor hole - Titanium Coated High Speed Steel Step Bit Set 2 Pc
I put on some Trail Tailer recovery points but I don't think the holes will be accessible because of clearance issue with the TJM winch frame. I'll probably have to build a spacer with some 1/4" or 1/2" aluminum so they sit lower and get some longer bolts.
Last edited:
Ckkone that looks great. Is am looking at what bumper to install on the 13 I just bought a few weeks ago. Where did you buy your bumper from?
That’s. I already got a price from Christi on the BP-51’s and a rear. Better add the TJM to the list.
Markuson
SILVER Star
You can talk to Wes Carter at TJM here in the San Diego area, and he'll tell you about shipment times, as there tends to be limited supply.
**Wes won't sell to you directly though, so I'd talk to Christo. Slee tends to get ahold of the slow trickle of shipments pretty regularly.
Thanks Markuson!
I have emailed Christo already
I have emailed Christo already
@ckkone I saw you mounted a winch with the synthetic line and used the extension for the hawse fairlead. I have a Warn VR10000s with synthetic line and once i put the extension piece on for the fairlead, it makes the line contact the winch steel. Do you have any problems with your winch line doing that? I will try to post up a pic showing what I am talking about.
The line co tact’s the angle support that goes on the winch plate.
Markuson
SILVER Star
I highly recommend Stedi lights out of Australia. Heavier mounting brackets than ARB, and include harness, switches and two amazing lights shipped to your door in the US for $600.
Here they are on my TJM T13:
Here they are on my TJM T13:
Last edited:
