Parting Out 1999 Toyota Land Cruiser (1 Viewer)

[bryanlewis83]

Location

United States

Just got this one.

Here is the story: After $4000 worth of work three weeks later the person rolled it three times (they walked away). It has set since April of 2017 and I came across it. Snagged it up and now its time to help other 100 drivers get their rigs bag to driving/showroom/off road condition.

A lot of good guts! Only straight body parts are hood, rear hatch and lift gate (tiny rust spot).

Engine and drive train has 300K on them.

Please note: I just got this and haven't pulled anything yet. So unless it is an easy snag it may take me a little time.

Let me know what you are looking for and I will shoot you a price.

NOTE: Rear spoiler is already gone. Went on my 100

 

[NHouston]

Condition of driver and passenger seats?

 

[NHouston]

Steering wheel?

 

[jayeeaaahhh]

pm sent.

 

[AlabamaLC]

Are the hood support pistons still good?

 

[fl4031003]

Rear spoiler.

 

[bryanlewis83]

Are the hood support pistons still good?

They are shot

 

[bryanlewis83]

Rear spoiler.

Used it for my own 100. Sorry, taken

 

[sailor95]

Rear axle? Driver and Passenger Seat?

 

[TLCJC]

Cool!

Inside driver side front door handle assembly?

Switch assembly for lower dash buttons for side view mirror Defog, rear window defog, etc?

Transmission shift handle?

 

[AlabamaLC]

What about the radio antenna motor? Any clue if it works?

 

[aljollano]

Hvac controls with bezel if you don't want to part it please, specially the one that changes the speed of the fan is the one I'm going after.

A.J

 

[LXFAM]

Rear liftgate?

 

[TRDMaui]

I need the upper and lower oil pan, and the oil pickup if thats possible. Thanks.

 

[allan man]

How much for the aux. Fan in the 3rd picture shipped to nevada?

 

[Ayune]

Do you still have the rear slide-out cup holder assembly? Should be an easy snag . My zip is 97202. Thanks!

 

[BreckenridgeCruiser]

Brake booster and shift knob please!

 

[dinnertime]

Center console, (other guy could have the rear slide out cup holder, but Id need sliders still on the console)
Trim piece that the locker,mirror and vent switches are on.
Center dash trim, the one that all the hvac contols and radio are surrounded by.
Console trim that goes around the shifter and has the seat heater switches in.
Front console cup holder (screwed to previously mention trim)
Potentially all 4 window switch trim bezels.
Pass rear ash tray
How are the door panels or speaker grills?
driver side 3rd row cup holder (fold out)
Looks like the lift gate might have been smashed up, but hows the weather strip on it that seals to the tail gate?
Second row middle head rest

Does it have rear A/C? Need a part of the trim panel

 

[bryanlewis83]

Hey everybody, I've got your requests. Thanks for the interest. I've got the order of who wants what. I'll start sending PM's soon.

 

[CaneCounsel007]

Hello! I am hoping for the following parts (shipped to 32803):
-- the screws and nuts holding down the engine cover (all 4 pls)
-- the nuts (and/or screws) holding down the battery carrier that go on the hook thing that holds the battery in place on the tray
-- a knob/screw that holds the roof rack cross bar into place.
-- how does the lower tail-gate interior cover/liner piece look? I think it just snaps into place. Please advise as if that can be removed/rolled up/ shipped for reasonable price

THANK YOU BRYAN.