Geeez , I thought Crusha knew stuff !!1974 GT250...I believe.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Geeez , I thought Crusha knew stuff !!1974 GT250...I believe.
Geeez , I thought Crusha knew stuff !!
He got a lot closer than I would... I nailed it as a Suzuki...Geeez , I thought Crusha knew stuff !!
I was putting new pins into the steering box SST Patrick had borrowed. Decided it would be a nice tool to have in my collection so I made a copy of it. While I was at it I made a second to add to the club loaner tool program. I didn't have a way to broach the 1/2" drive hole so I milled it for a 24mm hex socket. View attachment 1558518 View attachment 1558519
Wow, that looks like a lot of fun. Can you make a stick shift removal tool? I'm dangerous with the two screwdriver method.
View attachment 1559389 Straightened up the shop ahead of next weekend's tech day. I can see the tops of both benches.
Feels good to straighten up, right? I try and do it every five years or so...
I would think cutting out the back of the cross member would be a bad idea, as you will weaken a critical piece of the assembly. Can you drill through and put a longer bolt through?Swapped out my 8.8 bolts for 10.9 and torqued down to 80 ft/lbs. Unfortunately I stripped out one of the top two captured nuts so I need to cut out the back of the cross member to get access to put a nut on back there. It's probably better to put a 10.9 nut back there on both versus the captured nuts.
View attachment 1562061