caz
Keystone Cruisers
Looking for minitruck, 4runner, or even semi float cruiser axle housing to cut apart to make a tool to press out rear axle bearings.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Looking for minitruck, 4runner, or even semi float cruiser axle housing to cut apart to make a tool to press out rear axle bearings.
View attachment 1534934
Looking for the wiring at the left front fender and one or 2 things under the dash. I believe I have a few missing parts as I picked up this fj40 in pieces. This thing also has lot of hack job wiring including burnt wires from the alternator to voltage regulator on the other side but I think I got that figured out.I would say you can look at my 40. But the current owner has butchered the wiring.
What wiring you need some help with?
If you still need help your welcome to look at mineHeader and exhaust for a 63 fj40 f engine.View attachment 1535868 Was asking 100 but make an offer, willing to give away to someone who is willing to let me look at their 40 to help figure out some wiring issues on mine.
I will look at the one I have. It has sat outside for the past 4 years so don't get your hopes up. If it's worth it I can bring it to Fall Crawl. Or meet you half way.
Anyone have any good 4-speed transfercases they'd part with for a 40-series?
My idler gear has pitting on the bearing races and the input shaft is toast.
View attachment 1537859
View attachment 1537860
Georg might have a spare gear set laying around but if anyone has a good gear set or a full case locally for the right price it would save me some shipping!
I may have what you need...
Will do. I'll dig around tonight...
By the way, we do have our swap meet and truck show in Alexandria this weekend.
Not coming to the swap meet?I will look at the one I have. It has sat outside for the past 4 years so don't get your hopes up. If it's worth it I can bring it to Fall Crawl. Or meet you half way.
Anyone have any good 4-speed transfercases they'd part with for a 40-series?
My idler gear has pitting on the bearing races and the input shaft is toast.
View attachment 1537859
View attachment 1537860
Georg might have a spare gear set laying around but if anyone has a good gear set or a full case locally for the right price it would save me some shipping!
I should have pretty much everything except the front and rear output cones (gotta keep a spare just in case a blow one up). But you should have those from the case you have and they are usually in good shape.
Not coming to the swap meet?