For Sale 73, 77, 78 SERIES diesel parts, engines in Van, BC Canada (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Hubs were sold with the front axle. I have some parts versions. What pieces do you need?
the one i have is 85980-60080 (Door module)

I'll check what E- hubs that i have. You want the harness from the axle to the chassis? that's part of the main harness. if you want the on axle one, i don't have that.
 
Would you happen to have a list of what you have left?


The list is long...

Good, complete 1HZ
Good complete (installed, 1PZ-Turboed)
Lots of doors
12 and 24v electrical
Glass
Interior
Front tube bumper
Semi-float rear end with 410 and LSD
AC SYSTEMS (2 SETS)
3 turbochargers and intercooler kits (all brand new)
Turbo conversion kit for the 1HZ
Some misc 1HD-T engine parts
Small bits and bobs
Fenders/hoods/ fender inners
Door cards
24-12v converters; 15 amp and 60 amp
LHD H-4 headlights

Frames/ body tubs gone.
 
Thats a dangerous list.....sigh.....PM sent to gauge just how much money I'm about to send BiffS....
 
New to the thread.
Have you got a good 3B for my 24V BJ42?
Thanks in advance,
Nick
 
Door cards tan? LX model by chance? Pics please, pm is fine or email me ian at snlandcruisers dot com

I am looking for other things as well but let's start with the door cards.

Cheers
 
All the trucks were the grey/ blue combos.

73 was a ZX
Prado a VX

Door cards tan? LX model by chance? Pics please, pm is fine or email me ian at snlandcruisers dot com

I am looking for other things as well but let's start with the door cards.

Cheers
 
Suspension or fixed seats?

Fixed.

I would consider the suspension bases if you have them. I know they don't bolt in non-suspension seat trucks.

Cheers
 
Fixed.

I would consider the suspension bases if you have them. I know they don't bolt in non-suspension seat trucks.

Cheers

Sorry for the delay, was out of country. I have suspension bases. Were in the HZ73 ZX trim. They will bolt to some factory floors as the drill points are marked on the bare metal floor, just need to add some stiffeners or large plate washers and a nut below. The body tub i have now for my 77 series was non suspension and that was the conversion.
 
@BiffS Do you still have the suspension bases for the seats? I might be interested if @RMP&O doesn't want them. Thanks
 
Last edited:
BiffS,

I need a transfer case shift lever for my 77. Do you have one for available?

Thanks,
Paul
I don't have one for that. Try Steve at EBI. Sorry.
 

Users who are viewing this thread

Back
Top Bottom