- Joined
- Jun 6, 2005
- Threads
- 63
- Messages
- 1,185
- Location
- Jacksonville Beach, Florida
- Website
- exitoffroad.com
Stock height stuff comes up all the time, so I figured I should start a thread to list out our options specifically for those not wanting to lift much, but correct the ride quality. Many have seen how well 80's look when they're riding back at stock height, especially with the amount of sag that some of these trucks have. A new pair of stock height coils could bring up an inch or two depending on how worn all the OE parts are.
Also, for those people who have added weight (bumpers, etc) but don't want to lift too much, with the weight of the accessories you have, front or rear, we can figure out which coil would be the best to choose to get you at the desired ride height.
Front Coils
C59-210V - Standard height, stock load - variable rate (best riding option)
C59-174 - Standard height, stock load - linear rate (not stocked in the USA)
C59-168 - Standard height +15mm lift (0.6"), with 250LB load (bumper and winch) - linear rate. Picks up the front a bit taller than stock with the heavy load to reduce some rake front to rear (not stocked in the USA)
C59-220V - 40mm lift with bullbar OR winch (110LBS) - Picks up the front a bit taller than stock with the weight of a steel bumper to reduce rake from front to rear.
Rear Coils - All Compliled here
C59-221V - Standard height, stock load - variable rate (best riding option)
C59-243 - Standard height, stock load - linear rate
C59-169 - Standard height when loaded with heavy load 600LB load (rear bumper, etc) - linear rate.
Front Shocks
GS59-683 - Heavy duty twin tube nitrogas shocks - For 0-3" of lift
SD59-824 - Heavy duty big bore steering damper with new fittings - works with or without lift
Rear Shocks
GS59-682 - Heavy duty twin tube nitrogas shocks - For 0-3" of lift
And for trimming purposes left or right, or to add a little extra lift, here are the coil spacer options, all available individually.
Front Coil Spacers
PS59-4002 - 10mm
PS59-4003 - 20mm
PS59-4004 -30mm
Rear Coil Spacers
PS59-4005 - 10mm
PS59-4006 - 15mm
PS59-4007 - 30mm
Front Radius Arm Bushings
RB59-536K - 0 Degree standard rubber radius arm bushings - arm to axle (contains 4)
RB59-534K - Standard rubber bushings - arm to chassis (contains 2)
Also, for those people who have added weight (bumpers, etc) but don't want to lift too much, with the weight of the accessories you have, front or rear, we can figure out which coil would be the best to choose to get you at the desired ride height.
Front Coils
C59-210V - Standard height, stock load - variable rate (best riding option)
C59-174 - Standard height, stock load - linear rate (not stocked in the USA)
C59-168 - Standard height +15mm lift (0.6"), with 250LB load (bumper and winch) - linear rate. Picks up the front a bit taller than stock with the heavy load to reduce some rake front to rear (not stocked in the USA)
C59-220V - 40mm lift with bullbar OR winch (110LBS) - Picks up the front a bit taller than stock with the weight of a steel bumper to reduce rake from front to rear.
Rear Coils - All Compliled here
C59-221V - Standard height, stock load - variable rate (best riding option)
C59-243 - Standard height, stock load - linear rate
C59-169 - Standard height when loaded with heavy load 600LB load (rear bumper, etc) - linear rate.
Front Shocks
GS59-683 - Heavy duty twin tube nitrogas shocks - For 0-3" of lift
SD59-824 - Heavy duty big bore steering damper with new fittings - works with or without lift
Rear Shocks
GS59-682 - Heavy duty twin tube nitrogas shocks - For 0-3" of lift
And for trimming purposes left or right, or to add a little extra lift, here are the coil spacer options, all available individually.
Front Coil Spacers
PS59-4002 - 10mm
PS59-4003 - 20mm
PS59-4004 -30mm
Rear Coil Spacers
PS59-4005 - 10mm
PS59-4006 - 15mm
PS59-4007 - 30mm
Front Radius Arm Bushings
RB59-536K - 0 Degree standard rubber radius arm bushings - arm to axle (contains 4)
RB59-534K - Standard rubber bushings - arm to chassis (contains 2)
Last edited: