The FJ55 Weatherstrip Guide (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 28, 2004
Threads
19
Messages
264
I've been compiling this list for awhile as I have been "refurbishing" my 55. Following are part numbers, prices, sources, and pics for most of the rubber parts on the Pig. Most parts are identical or very close to factory - while a few were chosen for economics. If I left out anything, please add.....:cheers:

FJ55 Weatherstripping

Source Price Part # Length
Window Channel

Driver / JC Whitney/ $9/ ZX184879T/ 8 ft
Passenger/ JC Whitney/ $9/ ZX184879T/ 8 ft
Left Rear/ JC Whitney/ $9/ ZX184879T/ 8 ft
Right Rear/ JC Whitney/ $9/ ZX184879T/ 8 ft
Tailgate/ PV Cruisers/ $225/

Window Felt (straight chrome w/ felt)

Driver/ JC Whitney/ $14/ ZX193480P/ 8 ft
Passenger/ JC Whitney/ $14/ ZX193480P/ 8 ft
Left Rear/ JC Whitney/ $14/ ZX193480P/ 8 ft
Right rear/ JC Whitney/ $14/ ZX193480P/ 8 ft
Tailgate Inner/ JC Whitney/ $14/ ZX193480P/ 8 ft
Tailgate Outer/ JC Whitney/ $17/ ZX819752R/ 4 ft

Door Weatherstrip

Driver/ JC Whitney/ $17/ ZX813688A/ 10 ft
Passenger/ JC Whitney/ $17/ ZX813689B/ 10 ft
Left Rear/ JC Whitney/ $17/ ZX813688A/ 10 ft
Right Rear/ JC Whitney/ $17/ ZX813689B/ 10 ft
Tailgate - Sides/ JC Whitney/ $10/ ZX133178W/ 10 ft

Body Moulding - this piece is a little too thick to allow the door to close easily. See thread details for other possible solutions...

Driver/ JC Whitney/ $38/ ZX132562B/ 25 ft (enough for 2 doors)
Passenger/ JC Whitney/ "/ ZX132562B/
Left Rear/ JC Whitney/ $38/ ZX132562B/ 25 ft (enough for 2 doors)
Right Rear/ JC Whitney/ "/ ZX132562B/
Tailgate/ JC Whitney/ "/ ZX132562B/

Glass Weatherstrip

Windshield/ SOR/ $39/ 120-03G-A
Cargo - Left & Right/ PV Cruisers/ $230
Left Rear (small)/ $UnObtanium/
Right Rear (small)/ $UnObtanium/

Other Items
Metal clips for attaching door and cargo panels/ www.restorationspecialties.com/ page 100 part#1969
Plastic insert for " " " / www.restorationspecialties.com/ page 101 part#5127
Metal clips for attaching window felt / www.restorationspecialties.com/ page 91 part#11411
 
Last edited:
Pics 1
W 1.jpg
w 2.jpg
w 3.jpg
 
pics 2

pics 2
w 4.jpg
w 5.jpg
w 6.jpg
 
pics 3
w 7.jpg
w 8.jpg
w 9.jpg
 
pics 4
w 10.jpg
w 11.jpg
w 12.jpg
 
pics 5
w 13.jpg
 
Nothing to add other than THANKS!!!
 
very nice, good job!
 
WOW! You have saved everyone a lot of time and effort. I second the motion to make this a sticky!
 
THat's exactly what I needed to finish assembling my parts. Thanks!!!
 
PabloCruise said:
I have a question - does the window channel match the orig thickness?

I replaced the DS channel in my 40 w/ some generic channel and the effort required to raise and lower the window is too much. Not rattles, but I am worried about breaking the crank...

Yes - I think the window channel is an "exact" match - as is the the weatherstrip that goes on the door. It even has a pre-moulded 90 degree corner. In JC Whitney catalog it is listed as a 1970's Toyota minitruck w/s and is a perfect match to the original.
 
I wholeheartedly second, third, wave in the air... jump up and down... whatever it takes to make this a sticky somewhere... holy crap. I've been looking for this info for at least a year.

THANKS!!!
 

Users who are viewing this thread

Back
Top Bottom