Finally a workshop/storage/mancave (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Tyres in position.
IMG_0741.JPG
 
Dude, nice work!!! Love the overhead crane setup.

I've never seen metal joists like that. Care to share details on them?
 
Dude, nice work!!! Love the overhead crane setup.

I've never seen metal joists like that. Care to share details on them?
It is just a small I beam on 50x50x5mm box steel posts. We are going to run a trolley in the beam. The construction should be able to carry 1000 kg but we won't exeed 250kg. Most of the loads are less than 100 kg. I was surprised how torsion sensitive the I beam was, during construction of the frame I had to turn it over. So we braced the construction on the top to the roof of the building to prevent any movement under load, it is very solid now.
I will take a few detail pics later.
 
Last edited:
Worked on air and electrical systems.
IMG_0891.JPG

All air outlets are curved up, on the right you see a tap off point going down.
IMG_0893.JPG


IMG_0894.JPG
IMG_0895.JPG

Part of the tubing was already there for heating. Took it apart and created a ring line. Then completed it to a full ring with outlets, feed and tap off point. It is rated to 10 bar. You just need professional equipment to lock the pieces together.
 
Last edited:
I really need to plumb my new shop for air; it's one of the (many?) things that slipped my mind. Unfortunately, it's going to have to wait for a while now, since it's the storage space for our move currently.
 

Users who are viewing this thread

Back
Top Bottom